prikaz prve stranice dokumenta Tehnolgija izrade metalnih mjehova
Access restricted to students and staff of home institution
undergraduate thesis
Tehnolgija izrade metalnih mjehova
Slavonski Brod: University of Slavonski Brod, 2021. urn:nbn:hr:262:439107
Čretni, Igor
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Čretni, I. (2021). Tehnolgija izrade metalnih mjehova (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:439107

Čretni, Igor. "Tehnolgija izrade metalnih mjehova." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:439107

Čretni, Igor. "Tehnolgija izrade metalnih mjehova." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:439107

Čretni, I. (2021). 'Tehnolgija izrade metalnih mjehova', Undergraduate thesis, University of Slavonski Brod, accessed 24 June 2024, https://urn.nsk.hr/urn:nbn:hr:262:439107

Čretni I. Tehnolgija izrade metalnih mjehova [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 June 24] Available at: https://urn.nsk.hr/urn:nbn:hr:262:439107

I. Čretni, "Tehnolgija izrade metalnih mjehova", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:439107

Metadata
TitleTehnolgija izrade metalnih mjehova
Title (english)TECHNOLOGY OF MAKING METAL BELLOWS
AuthorIgor Čretni
MentorMarija Stoić (mentor)
Committee memberMarija Stoić (predsjednik povjerenstva)
Committee memberMladen Bošnjaković (član povjerenstva)
Committee memberSlavica Kladarić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2021-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su analizirani postupci proizvodnje metalnih mjehova. Različitim pristupima oblikovanju mjehova ostvaruju se različita proizvodna vremena te različite mehaničke osobine. Zadatkom je trebalo usporediti prednosti i mane predstavljenih postupaka te utvrditi njihov utjecaj na konstrukciju mijeha. Krutost mijeha je mjerena pri negativnom pomaku (kompresija), pokazana je usporedba računske i stvarne krutosti. Analiza je pokazala da je stvarna krutost za 16,85 % odnosno 18,14 % manja od računske krutosti što je unutar normom predviđene vrijednosti od ± 30 %. Rezultati ukazuju na to da je potrebno obratiti pažnju na izbor postupka oblikovanja kako bi se zadovoljili konstrukcijski zahtjevi zbog posljedica koje različita deformacija lima ima na metalni mijeh, kao i ekonomski zahtjevi zbog količine proizvoda.
Abstract (english)
The paper analyses processes of manufacturing metal bellows. Different production time and different mechanical properties are accomplished by selecting different approaches in bellows forming. The task is supposed to compare advantages and disadvantages of presented technological processes as well as to identify their influence on bellows construction. Spring rate of bellows is measured in compression only, comparison of calculated and actual spring rate is displayed. Analysis has shown that actual spring rate is 16,85 % i.e. 18,14 % smaller than calculated one, which is within the allowed 30 % specified in standard. Results indicate that it is necessary to take special care on choosing the forming process in order to fulfil construction requirements due to effect that different deformation has on metal bellows, along with the economic requirements due to quantity of products.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:439107
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-07-09 06:39:23