prikaz prve stranice dokumenta Tehnološki postupak izrade pužnog vijka
Access restricted to students and staff of home institution
undergraduate thesis
Tehnološki postupak izrade pužnog vijka
Slavonski Brod: University of Slavonski Brod, 2024. urn:nbn:hr:262:912089
Peco, Ante
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Peco, A. (2024). Tehnološki postupak izrade pužnog vijka (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:912089

Peco, Ante. "Tehnološki postupak izrade pužnog vijka." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:912089

Peco, Ante. "Tehnološki postupak izrade pužnog vijka." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:912089

Peco, A. (2024). 'Tehnološki postupak izrade pužnog vijka', Undergraduate thesis, University of Slavonski Brod, accessed 02 October 2024, https://urn.nsk.hr/urn:nbn:hr:262:912089

Peco A. Tehnološki postupak izrade pužnog vijka [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2024 [cited 2024 October 02] Available at: https://urn.nsk.hr/urn:nbn:hr:262:912089

A. Peco, "Tehnološki postupak izrade pužnog vijka", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:262:912089

Metadata
TitleTehnološki postupak izrade pužnog vijka
Title (english)TECHNOLOGICAL PROCEDURE OF MANUFACTURING SCREW
AuthorAnte Peco
MentorZoran Crnac (mentor)
Committee memberMarija Stoić (predsjednik povjerenstva)
Committee memberZoran Crnac (član povjerenstva)
Committee memberMladen Bošnjaković (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2024-06-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu planirane su i odabrane proizvodne aktivnosti za izradu segmenta pužnice tzv. pužnog tlačnog vijka, koji se koristi u pužnim prešama za ekstrakciju suncokretovog ulja. Specifična geometrija i teški uvjeti rada u kojima se nalaze pužni vijci predstavljaju velik izazov u odabiru materijala i primjeni postupaka obrade. Cilj ovog rada je primijeniti raspoložive informacije i resurse te na osnovu njih kreirati cjelokupnu tehnološku dokumentaciju za velikoserijsku proizvodnju pužnih tlačnih vijaka
Abstract (english)
In this paper, production activities are planned and selected to produce the screw press segment, the so-called pressure screw, which is used in screw presses for extraction of sunflower oil. The specific geometry and difficult operating conditions in which pressure screws are found represent a great challenge in the selection of materials and the application of machining procedures. The goal of this paper is to apply the information and resources available and based on them, create the entire technological documentation for the large-scale production of pressure screws.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:912089
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-07-03 06:56:47