prikaz prve stranice dokumenta Električni transformatori s primjenom u strojarstvu
Access restricted to students and staff of home institution
undergraduate thesis
Električni transformatori s primjenom u strojarstvu
Slavonski Brod: University of Slavonski Brod, 2024. urn:nbn:hr:262:854386
Brkić, Luka
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Brkić, L. (2024). Električni transformatori s primjenom u strojarstvu (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:854386

Brkić, Luka. "Električni transformatori s primjenom u strojarstvu." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:854386

Brkić, Luka. "Električni transformatori s primjenom u strojarstvu." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:854386

Brkić, L. (2024). 'Električni transformatori s primjenom u strojarstvu', Undergraduate thesis, University of Slavonski Brod, accessed 22 July 2024, https://urn.nsk.hr/urn:nbn:hr:262:854386

Brkić L. Električni transformatori s primjenom u strojarstvu [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2024 [cited 2024 July 22] Available at: https://urn.nsk.hr/urn:nbn:hr:262:854386

L. Brkić, "Električni transformatori s primjenom u strojarstvu", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:262:854386

Metadata
TitleElektrični transformatori s primjenom u strojarstvu
Title (english)Electric transformers with application in mechanical engineering
AuthorLuka Brkić
MentorPetar Nakić (mentor)
Committee memberIvica Lacković (predsjednik povjerenstva)
Committee memberPetar Nakić (član povjerenstva)
Committee memberMarko Martinović (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2024-07-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu predočeno je načelo rada električnih transformatora općenito, s naglaskom na primjenu transformatora u strojarstvu gdje se pomoću transformatora vrši regulacija struje za zavarivanje. Na samom početku rada opisan je rad elektroenergetskog sustava, detaljno je objašnjen princip rada transformatora te je navedena podjela transformatora i njegovih glavnih konstrukcijski dijelova. Kroz šesto poglavlje, primjene transformatora u strojarstvu opisan je princip rada transformatora za zavarivanje te su navedeni postupci zavarivanja, gdje se koristi ne samo transformator već i drugi uređaji poput invertera i ispravljača. Upravo tim korištenjem različitih uređaja pri zavarivanju te njihovom dobivenom usporedbom, zaključak je da se transformatori za zavarivanje sve manje koriste, te se teži uporabom drugih uređaja poput invertera za zavarivanje.
Abstract (english)
In this final paper, the principle of operation of electrical transformers in general is presented, with an emphasis on the application of transformers in mechanical engineering, where current regulation for welding is done using transformers. At the very beginning of the work, the operation of the power system is described, the working principle of the transformer is explained in detail, and the division of the transformer and its main structural parts is indicated. Through the sixth chapter, applications of transformers in mechanical engineering, the working principle of welding transformers is described and welding procedures are listed, where not only the transformer is used, but also other devices such as inverters and rectifiers. Precisely because of the use of different devices during welding and their comparison, the conclusion is that welding transformers are used less and less, and the use of other devices such as welding inverters is preferred.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:854386
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-07-17 10:54:21