prikaz prve stranice dokumenta Digitalizacija skladišta reznih alata
Access restricted to students and staff of home institution
undergraduate thesis
Digitalizacija skladišta reznih alata
Slavonski Brod: University of Slavonski Brod, 2024. urn:nbn:hr:262:093529
Punda, Josip
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Punda, J. (2024). Digitalizacija skladišta reznih alata (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:093529

Punda, Josip. "Digitalizacija skladišta reznih alata." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:093529

Punda, Josip. "Digitalizacija skladišta reznih alata." Undergraduate thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:093529

Punda, J. (2024). 'Digitalizacija skladišta reznih alata', Undergraduate thesis, University of Slavonski Brod, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:093529

Punda J. Digitalizacija skladišta reznih alata [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2024 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:262:093529

J. Punda, "Digitalizacija skladišta reznih alata", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:262:093529

Metadata
TitleDigitalizacija skladišta reznih alata
Title (english)DIGITALIZATION OF TOLL STORAGE FOR CUTTING TOOLS
AuthorJosip Punda
MentorMarija Stoić (mentor)
Committee memberSlavica Kladarić (predsjednik povjerenstva)
Committee memberMarija Stoić (član povjerenstva)
Committee memberNataša Veljić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2024-09-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Najveći problem prije uvođenja digitalizacije u skladište reznih alata je bio taj što se nije znalo brojčano stanje alata niti gdje se koji alat nalazi. Liste alata su također stvarale problem budući da su bile printane na papiru pa su se mogli nadopisati alati koji nisu bili potrebni za posao. Cilj ovog rada je opisati kako se uvela digitalizacija alata u tvornici te koji su sve problemi bili. Kroz rad se došlo do zaključka da se uvođenjem TDM programa dobilo na točnosti baze podataka, boljem praćenju zalihe alata i boljoj iskoristivost reznih alata.
Abstract (english)
The biggest problem before the introduction of digitization in the storage of cutting tools was that you did not know the numerical status of the tools or where each tool was located. Tool lists were also a problem since they were printed on paper, so tools that were not needed for the job, could be overwritten. The aim of this paper is to describe how the digitization of tools was introduced in the factory and what all the problems were. Through this paper, we came to the conclusion that the introduction of the TDM program improved the accuracy of the database, better monitoring of the tool stock and better utilization of cutting tools.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:093529
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/stručna prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-09-25 09:41:41