prikaz prve stranice dokumenta PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50
Access restricted to students and staff of home institution
undergraduate thesis
PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50
Slavonski Brod: University of Slavonski Brod, 2021. urn:nbn:hr:262:498756
Krijan, Ivan
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Krijan, I. (2021). PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50 (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:498756

Krijan, Ivan. "PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:498756

Krijan, Ivan. "PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:498756

Krijan, I. (2021). 'PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50', Undergraduate thesis, University of Slavonski Brod, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:262:498756

Krijan I. PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50 [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:262:498756

I. Krijan, "PROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:498756

Metadata
TitlePROJEKTIRANJE TEHNOLOŠKOG POSTUPKA ZA IZRADU PREMA CRTEŽU 10 - 20 - 50
Title (english)DESIGNIG A TECHNOLOGICAL PROCEDURE ACCORDING TO DRAWING 10 - 20 - 50
AuthorIvan Krijan
MentorOlivera Maglić (mentor)
Committee memberOlivera Maglić (predsjednik povjerenstva)
Committee memberNataša Veljić (član povjerenstva)
Committee memberMarija Stoić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2021-07-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Završni rad obuhvaća analiziranje i projektiranje tehnološkog postupka izrade nastavka hvatača prema crtežu 10 – 20 – 50. Kroz projektiranje tehnološkog postupka izrade opisana je važnost planiranja i organiziranja proizvodnje. Prvo se analizirao tehnički crtež nastavka hvatača, analizirale su se dimenzije, tolerancije, zahtijevana točnost izrade, kao i potrebni materijali. Nakon toga u sklopu projektiranja tehnološkog procesa izrade određuje se redoslijed tehnologije operacija i zahvata, kao i strojevi na kojima se izvodi obrada. Tehnologija izrade obuhvaća sve tehnološke operacije kojima se dolazi od polaznog materijala do gotovog proizvoda. Tehnologija izrade mora biti kvalitetna, efikasna i ekonomski prihvatljiva zbog konkurencije na tržištu. U radu je projektirana izrada radne pozicije, odabrani su alati i strojevi za obradu te izrađena je kalkulacija izrade. Kalkulacijom izrade dobivaju se približne vrijednosti vremena obrade koje omogućavaju izradu ponude kupcu i planiranje vremena proizvodnje.
Abstract (english)
The baccalaureus thesis includes the analysis and design of the technological process of making the extension catcher according to the drawing 10 - 20 - 50. Through the design of the technological process it is described the importance of planning and organizing the production. First, the technical drawing of the extension cather was analyzed, the dimensions, tolerances, required manufacturing accuracy, as well as the required materials were analyzed. After that, as part of the design of the technological process of production, the order of the technology of operations and interventions is determined, as well as the machines on which the processing is performed. Manufacturing technology includes all technological operations that take place from the starting material to the finished product. Manufacturing technology must be high quality, efficient and economically acceptable due to competition in the market. Thesis projects the creation of a working position, selects tools and machines for processing and makes a calculation of production. The calculation of production provides approximate values of processing time, which enable the preparation of an offer to the customer and the planning of production time.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:498756
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-07-16 09:33:37