prikaz prve stranice dokumenta TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01
  Download
PDF 5.04 MB
master's thesis
TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01
Slavonski Brod: University of Slavonski Brod, 2021. urn:nbn:hr:262:241809
Tori, Domagoj
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Tori, D. (2021). TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01 (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:241809

Tori, Domagoj. "TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:241809

Tori, Domagoj. "TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:241809

Tori, D. (2021). 'TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01', Master's thesis, University of Slavonski Brod, accessed 26 July 2024, https://urn.nsk.hr/urn:nbn:hr:262:241809

Tori D. TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01 [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 July 26] Available at: https://urn.nsk.hr/urn:nbn:hr:262:241809

D. Tori, "TEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:241809

Metadata
TitleTEHNOLOGIJA IZRADE PROIZVODA PREMA CRTEŽU OZNAKE DT01
Title (english)Technological procedure for making the product DT1
AuthorDomagoj Tori
MentorAntun Stoić (mentor)
Committee memberŽeljko Ivandić (predsjednik povjerenstva)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2021-09-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu pod naslovom „Tehnologija izrade proizvoda prema crtežu oznake DT01“ navedeni su, opisani te fotografijama prikazani postupci izrade predmeta od početnog sirovca do montaže, odnosno kroz sve tehnologije. Dakle, fotografijama unutar rada prikazani su pojedini korišteni alati i strojevi, a isto tako i postupci korišteni unutar pogona tvrtke Multinorm d.o.o. pri čemu je priložena dokumentacija za predmet s oznakama dimenzija i ostalih potrebnih u proizvodnji. Također, u ovome je radu učinjena deskripcija tehnologije izrade i montaže predmeta za prihvat robotske ruke u autoindustriji pri čemu su iskazani načini obrade, opisi i svojstva materijala koji se koristi, svojstva dobivena toplinskom obradom te o tehnoekonomskoj analizi predmeta. Ujedno su navedene i sve razne postupka za izradu predmeta kojim se dobivaju tražene dimenzije i predmet usklađen s mjerama nacrta koji se želi proizvoditi.
Abstract (english)
In the paper entitled as "Technology of making products according to the drawing of the mark DT01", the procedures of making objects from the initial raw material to assembly, ie through all technologies, are listed, described and shown in photographs. Thus, the photographs within the work show the individual tools and machines used, as well as the procedures used within the plant of Multinorm d.o.o. whereby the documentation for the subject with markings of dimensions and other necessary in production is enclosed. Also, in this paper is described the technology of manufacturing and assembly of objects for receiving a robotic arm in the automotive industry, showing the processing methods, descriptions and properties of the material used, the properties obtained by heat treatment and techno-economic analysis of objects. At the same time, all the various procedures for the production of the object by which the required dimensions are obtained and the object harmonized with the measures of the design to be produced are listed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:241809
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-09-09 12:31:05