prikaz prve stranice dokumenta PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''
Access restricted to students and staff of home institution
undergraduate thesis
PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''
Slavonski Brod: University of Slavonski Brod, 2021. urn:nbn:hr:262:463885
Vukašinović, Josip
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Vukašinović, J. (2021). PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV'' (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:463885

Vukašinović, Josip. "PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:463885

Vukašinović, Josip. "PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:463885

Vukašinović, J. (2021). 'PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''', Undergraduate thesis, University of Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:262:463885

Vukašinović J. PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV'' [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:262:463885

J. Vukašinović, "PRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:463885

Metadata
TitlePRIMJENA ELEMENATA KONSTRUKCIJA U KONCIPIRANJU I IZRADI SUSTAVA-''SPIN ROLA ZA RIBOLOV''
Title (english)APPLICATION OF STRUCTURAL ELEMENTS IN THE CONCEPT AND DESIGN OF THE SYSTEM - "SPIN ROLL FOR FISHING"
AuthorJosip Vukašinović
MentorŽeljko Ivandić (mentor)
Committee memberŽeljko Ivandić (predsjednik povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberIvan Grgić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2021-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada je pojasniti konstrukcijske i funkcionalne značajke tehničkog sustava „spin rola za ribolov“, te izraditi navedeni prijenosni mehanizam primjenom elemenata konstrukcija uz pomoć tehnologije 3D printanja i tokarenja. Rezultati i zapažanja tokom izrade sustava obrazloženi su proračunom i valjanim eksperimentalnim dokazima. Nakon što je pobliže prezentiran tehnički sustav „rola za ribolov“ uočene su prednosti koje se žele zadržati, odnosno nedostatci koji se žele ukloniti redizajnom. Redizajn postojećeg modela role za ribolov „SHIMANO AX 4000FB“ odrađen je u programu „CATIA V5“ zatim su redizajnirani dijelovi printani na printeru “Creality Ender 3“ te je tako nastala „SPIN ROLA ZA RIBOLOV-JV-ZR-2020“. Neki dijelovi role „SHIMANO AX 4000FB“ su zadržani dok je većina dijelova printana, tokarena ili zamijenjena. Velik dio rada posvećen je tehnologiji 3D printanja te je pobliže objašnjen proces od samog uočavanja problema (vizualno i matematički), modeliranja (u programu „CATIA V5“), odabira parametara printanja (u programu „Ultimaker Cura“), te u konačnici printanja (na printeru „Creality Ender 3“). U radu je još odrađen proračun karakterističnih konstrukcijskih značajki elemenata sustava gdje je jednadžbama dokazano da je prijenos u „SPIN ROLA ZA RIBOLOV-JV-ZR-2020“ multiplikator.
Abstract (english)
The aim of this paper is to explain the structural and functional features of the technical system "spinning reel for fishing" and to create the given transmission mechanism using structural elements, with help of 3D printing and turning technology. The results and observations during the development of the system are explained by the calculation and with valid experimental evidence. After the technical system of "fishing reels" was presented, we noticed the advantages that they want to keep and the disadvantages that they want to eliminate with the redesign. The redesign of the existing fishing reel model "SHIMANO AX 4000FB" was done in the program "CATIA V5", then the redesigned parts were printed on the printer "Creality Ender 3" and that is how the "SPINNING REEL FOR FISHING JV-ZR-2020" was created. Some parts of the "SHIMANO AX 4000FB" reel have been retained while most parts have been printed, turned or replaced. Much of the work is dedicated to 3D printing technology and the process is explained in more details from the problem (visual and mathematical), modeling (in the program "CATIA V5"), selection of printing parameters (in the program "Ultimaker Cura") and reticle printing (on printer Creality Ender 3). The paper also calculates the characteristic structural features of the system elements, where the equations prove that the transmission in the „SPINNING REEL FOR FISHING-JV-ZR-2020“ is a multiplire
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:463885
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-28 08:55:35