prikaz prve stranice dokumenta KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU
Access restricted to students and staff of home institution
master's thesis
KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU
Slavonski Brod: University of Slavonski Brod, 2022. urn:nbn:hr:262:867628
Mioč, Antonio
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Mioč, A. (2022). KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:867628

Mioč, Antonio. "KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:867628

Mioč, Antonio. "KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:867628

Mioč, A. (2022). 'KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU', Master's thesis, University of Slavonski Brod, accessed 05 July 2024, https://urn.nsk.hr/urn:nbn:hr:262:867628

Mioč A. KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 July 05] Available at: https://urn.nsk.hr/urn:nbn:hr:262:867628

A. Mioč, "KONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:867628

Metadata
TitleKONTROLA KVALITETE NAPRAVE ZA AUTO INDUSTRIJU
Title (english)QUALITY CONTROL OF DEVICE FOR CAR INDUSTRY
AuthorAntonio Mioč
MentorLeon Maglić (mentor)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-09-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog diplomskog rada je kontrola kvalitete naprave V536 za auto industriju. Ovaj diplomski rad je podijeljen na dva dijela, teorijski i praktični dio rada. U prvom dijelu rada (teoretskom) govori se općenito o samoj kontroli kvalitete, upravljanju i osiguranju kvalitete, razvoju i povijesti kontrole i normama. Drugi dio rada je praktični dio u kojem se govori o samom procesu kontrole kvalitete koju mora proći naprava V536 za auto industriju prije same otpreme, sa svim pratećim slikama i dokumentacijom. Prije same montaže ove naprave prati se proces kontrole kvalitete sirovca koji je potreban za izradu ove naprave, od ulazne kontrole sirovca, preko međufazne kontrole (kontrola kvalitete u samoj proizvodnji) do završne kontrole. Nakon toga slijedi montaža naprave sa svim proizvedenim i kupljenim pozicijama. Nakon montaže, naprava ide na umjeravanje, odnosno dimenzionalnu kontrolu kvalitete i nakon toga slijedi završna kontrola kvalitete cijele naprave. Kada se govori o kontroli kvalitete ove naprave misli se isključivo na vizualnu i dimenzionalnu kontrolu kvalitete.
Abstract (english)
The theme of this thesis is the quality control of the V536 equipment for the automotive industry. This thesis is divided into two parts, theoretical and practical part of the thesis. The first part of the paper (theoretical) discusses in general about the quality control itself, quality management and assurance, development and history of control and standards. The second part of the paper is a practical part which talks about the quality control process that the V536 for the automotive industry must go through before shipping, with all the accompanying pictures and documentation. Prior to the installation of this equipment, the process of quality control of the raw material required for the production of this device is monitored, from the input control of the raw material, through intermediate control (quality control in production) to the final control. This is followed by the assembly of the device with all positions produced and purchased. After installation, the device goes to calibration, ie dimensional quality control, followed by the final quality control of the entire device. When we talk about the quality control of this device, we mean exclusively visual and dimensional quality control.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:867628
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-09-08 10:29:17