prikaz prve stranice dokumenta ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE
Access restricted to students and staff of home institution
master's thesis
ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE
Slavonski Brod: University of Slavonski Brod, 2022. urn:nbn:hr:262:276563
Kapetan, Domagoj
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Kapetan, D. (2022). ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:276563

Kapetan, Domagoj. "ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:276563

Kapetan, Domagoj. "ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:276563

Kapetan, D. (2022). 'ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE', Master's thesis, University of Slavonski Brod, accessed 03 August 2024, https://urn.nsk.hr/urn:nbn:hr:262:276563

Kapetan D. ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 August 03] Available at: https://urn.nsk.hr/urn:nbn:hr:262:276563

D. Kapetan, "ISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:276563

Metadata
TitleISTRAŽIVANJE UTJECAJA OBLIKA LOPATICE NA AERODINAMIČKU EFIKASNOST ELISE DRONA PRIMJENOM CFD SIMULACIJE
Title (english)INVESTIGATION OF THE INFLUENCE OF BLADE SHAPES ON THE AERODYNAMIC EFFICIENCY OF ELISA OF DRON USING CFD SIMULATION
AuthorDomagoj Kapetan
MentorMarija Živić (mentor)
Committee memberMarinko Stojkov (predsjednik povjerenstva)
Committee memberMarija Živić (član povjerenstva)
Committee memberMario Holik (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu izvršena je CFD analiza strujanja zraka oko elisa drona sa dvije različite geometrije kako bi se usporedio utjecaj oblika lopatice obzirom na aerodinamičku efikasnost. Geometrija prve lopatice je dobivena uzimanjem uzoraka aeroprofila na 5 različitih presjeka već postojeće lopatice, te su digitalizacijom dobivene točke pomoću kojih se modeliraju aeroprofili i cijela elisa drona. Izvršene su 2D i 3D CFD simulacije u svrhu određivanja sile uzgona. Zadnji korak je generiranje modificirane geometrije i uspoređivanje rezultata s onom već postojećom. Ovakva istraživanja se provode zbog povećanja mogućeg vremena leta i jako je zanimljivo što postojeća geometrija korištena u ovom radu ima tako specifičan oblik što upućuje na to da se prilikom razvoja iste napravio veliki broj simulacija ili eksperimenata jer takav oblik nije slučajan. 3D simulacija je bliža stvarnosti pa su i rezultati dobiveni modelom simulacije koji je primijenjen bolji od rezultata dobivenih 2D simulacijom.
Abstract (english)
In this thesis, a CFD analysis of the air flow around the propeller of a drone with two different geometries was performed in order to compare the influence of the blade shape with regard to aerodynamic efficiency. The geometry of the first blade was obtained by taking airfoil samples on 5 different cross-sections of the already existing blade, and the points used to model the airfoils and the entire propeller of the drone were obtained by digitalization. 2D and 3D CFD simulations was performed in order to obtain the lift force. The last step is to generate the modified geometry and compare the results with the existing one. Such research are done to increase the possible flight time and it is very interesting that the existing geometry used in this work has such a specific shape that indicates that during its development a large number of simulations or experiments were made because such a shape is not random. 3D simulation is closer to reality, so the results obtained by the applied simulation model are better than the results obtained by 2D simulation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:276563
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Power Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-09-22 09:25:31