prikaz prve stranice dokumenta REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE
  Download
PDF 2.06 MB
undergraduate thesis
REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE
Karlovac: Karlovac University of Applied Sciences, 2019. urn:nbn:hr:128:981265
Obrovac, Josipa
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Obrovac, J. (2019). REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:981265

Obrovac, Josipa. "REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE." Undergraduate thesis, Karlovac University of Applied Sciences, 2019. https://urn.nsk.hr/urn:nbn:hr:128:981265

Obrovac, Josipa. "REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE." Undergraduate thesis, Karlovac University of Applied Sciences, 2019. https://urn.nsk.hr/urn:nbn:hr:128:981265

Obrovac, J. (2019). 'REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 09 November 2024, https://urn.nsk.hr/urn:nbn:hr:128:981265

Obrovac J. REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2019 [cited 2024 November 09] Available at: https://urn.nsk.hr/urn:nbn:hr:128:981265

J. Obrovac, "REŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:128:981265

Metadata
TitleREŠETKASTE KONSTRUKCIJE-PRIMJENA I METODE ANALIZE
Title (english)TRUSSES-APPLICATION AND METHODES OF ANALYSIS
AuthorJosipa Obrovac
MentorNenad Lorković (mentor)
Committee memberJosip Hoster (predsjednik povjerenstva)
Committee memberNikola Šimunić (član povjerenstva)
Committee memberNenad Lorković (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2019-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Kako i sam naslov kaže, tema ovog završnog rada jesu metode koje se koriste pri određivanju sila u štapovima rešetkastih nosača. Na samom početku krenut ćemo od podjele tehničkih konstrukcija i spomenuti nešto općenito o njima. Definirat ćemo pojmove statičke određenosti i neodređenosti rešetke te pojmove ravninske i prostorne rešetke. Obradit ćemo sveukupno četiri metode, od kojih su dvije analitičke, a dvije grafičke. Svaku od metoda razradit ćemo teorijski, a zatim prikazati princip provođenja kroz odabrani primjer. Problematika određivanja sila u štapovima rešetkastih nosača bit će bazirana isključivo na problemima koji se odnose na statički određene ravninske rešetkaste nosače. Problem određivanja sila u štapovima prostornih rešetkastih nosača neće biti obrađen u ovome radu.
Abstract (english)
As the title itself, the subject of this final work are methods which are used to determine the forces in the rods of truss girders. At the begining the division and general classification of technical constructions will be explained and mentioned. The definitions of static determinateness and indeterminateness of the grid and terms of plane and spacial gird will be defined. Four methods will be analyzed of which two are analytical and the other two are graphical. Each of this methods will be elaborated in theory and afterwards the principle of implementation will be shown by using selected example. The issue of determining forces in the rods of truss girders will be based exclusively upon problems which are referred to statically detirmined planar truss girders. The issue of determining forces in the rods of spacial truss girders will not be adressed in this final work.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:981265
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-01-10 09:36:14