prikaz prve stranice dokumenta KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA
  Download
PDF 4.28 MB
undergraduate thesis
KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA
Karlovac: Karlovac University of Applied Sciences, 2020. urn:nbn:hr:128:874227
Grandić, Josip
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Grandić, J. (2020). KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:874227

Grandić, Josip. "KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA." Undergraduate thesis, Karlovac University of Applied Sciences, 2020. https://urn.nsk.hr/urn:nbn:hr:128:874227

Grandić, Josip. "KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA." Undergraduate thesis, Karlovac University of Applied Sciences, 2020. https://urn.nsk.hr/urn:nbn:hr:128:874227

Grandić, J. (2020). 'KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 09 November 2024, https://urn.nsk.hr/urn:nbn:hr:128:874227

Grandić J. KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2020 [cited 2024 November 09] Available at: https://urn.nsk.hr/urn:nbn:hr:128:874227

J. Grandić, "KONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:128:874227

Metadata
TitleKONSTRUKCIJA NAPRAVE ZA TOKARENJE DISKA
Title (english)CONSTRUCTION DEVICES FOR TURNING DISC
AuthorJosip Grandić
MentorMarijan Brozović (mentor)
Committee memberTomislav Božić (predsjednik povjerenstva)
Committee memberNikola Šimunić (član povjerenstva)
Committee memberMarijan Brozović (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2020-07-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Završni rad obuhvaća konstruiranje ručne stezne naprave za tokarenje diska u programskoj aplikaciji CATIA V5. Konstrukcija naprave vrši se na temelju crteža diska i raspoloživog strojnog parka. Prvo se modeliraju i razrađuju dijelovi naprave, a potom se sklapaju u konačan sklop. Na osnovu modelirane pozicije izrađen je tehnički crtež za izradu iste. Za svaku modeliranu poziciju naprave izrađen je tehnološki proces izrade pozicije.
Abstract (english)
The final work includes the construction of a manual clamping device for turning a disk in the CATIA V5 software application. The device construction is done based on the drawings of the disk and available machine park. The parts of the device are first modeled and worked out, and then assembled into a final assembly. Based on the modeled position, a technical drawing was made for it’s construction. For each modeled position of the device, a technological process of position creation was made
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:874227
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-07-21 11:36:08