prikaz prve stranice dokumenta IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI
  Download
PDF 3.41 MB
undergraduate thesis
IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI
Karlovac: Karlovac University of Applied Sciences, 2022. urn:nbn:hr:128:624337
Kralj, Zvonimir
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Kralj, Z. (2022). IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:624337

Kralj, Zvonimir. "IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI." Undergraduate thesis, Karlovac University of Applied Sciences, 2022. https://urn.nsk.hr/urn:nbn:hr:128:624337

Kralj, Zvonimir. "IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI." Undergraduate thesis, Karlovac University of Applied Sciences, 2022. https://urn.nsk.hr/urn:nbn:hr:128:624337

Kralj, Z. (2022). 'IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:128:624337

Kralj Z. IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2022 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:128:624337

Z. Kralj, "IZRADA CENTRIRANOG TRNA NA CNC TOKARILICI", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:128:624337

Metadata
TitleIZRADA CENTRIRANOG TRNA NA CNC TOKARILICI
Title (english)MAKING A CENTERING THORN ON A CNC LATHE
AuthorZvonimir Kralj
MentorMarijan Brozović (mentor)
Committee memberNikola Šimunić (predsjednik povjerenstva)
Committee memberJosip Groš (član povjerenstva)
Committee memberMarijan Brozović (član povjerenstva)
Committee memberSanja Arapović (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2022-06-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Istoimeni završni rad se sastoji od uvoda tj, osnovnog teorijskog dijela u kojem se objašnjava povijest tokarenja i CNC tehnologije nakon kojeg slijedi opći dio koji se bazira na napredku CNC tehnologije, geometriji alata i dokumentaciji. U razradi zadatka se obrađuje CNC obradni tokarski centar Hwacheon Hi-TECH 450b, upute stroja, te njegovi načini rada. U praktičnom dijelu upoznaje se sa programom ESPRIT i sa 3D modelom centrirnog trna nakon kojeg se prolazi kroz cikluse u simulaciji CNC tokarenja.
Abstract (english)
The final paper consists of an introduction, ie, a basic theoretical part which explains the history of turning and CNC technology, after which the general part is based on the progress of CNC technology and the geometry of the tools and the documentation. In the elaboration of the task, the CNC turning center Hwacheon Hi-TECH 450b and its working modes are processed. In the practical part, the reader gets acquainted with the ESPRIT program and with the 3D model of the centered pin, after which he goes through cycles in the CNC turning simulation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:624337
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-19 07:22:06