prikaz prve stranice dokumenta LED STROBOSKOP
No public access
undergraduate thesis
LED STROBOSKOP
Karlovac: Karlovac University of Applied Sciences, 2023. urn:nbn:hr:128:218334
Kečkeš, Marko
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Kečkeš, M. (2023). LED STROBOSKOP (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:218334

Kečkeš, Marko. "LED STROBOSKOP." Undergraduate thesis, Karlovac University of Applied Sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:128:218334

Kečkeš, Marko. "LED STROBOSKOP." Undergraduate thesis, Karlovac University of Applied Sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:128:218334

Kečkeš, M. (2023). 'LED STROBOSKOP', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:128:218334

Kečkeš M. LED STROBOSKOP [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2023 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:128:218334

M. Kečkeš, "LED STROBOSKOP", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:128:218334

Metadata
TitleLED STROBOSKOP
Title (english)LED STROBOSCOPE
AuthorMarko Kečkeš
MentorFilip Žugčić (mentor)
Committee memberAnamarija Kirin (predsjednik povjerenstva)
Committee memberVedran Vyroubal (član povjerenstva)
Committee memberFilip Žugčić (član povjerenstva)
Committee memberNatalija Kusanić Belinić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2023-07-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu bit će opisana izrada LED stroboskopa koji se prvenstveno koristi za koncerte, noćne klubove i za vozila hitne pomoći. Bit će opisana izrada tiskane pločice, elektroničkih komponenata na njoj, korištenih alata te računalnog programa Target 3001 korištenog za izradu elektroničkih shema. Cilj ovog završnog rada je steći praktično iskustvo pomoću znanja stečenog tijekom obrazovanja.
Abstract (english)
This final paper will describe the making of an LED stroboscope that is primarily used for concerts, night clubs and for emergency vehicles. The making of the printed circuit board, the electronic components on it, the tools used and software Target 3001 used for the making of electronic schemes will be described. The aim of this final paper is to gain practical experience based on the theoretical knowledge acquired during education.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:128:218334
Study programmeTitle: Mechatronics
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2023-07-25 07:25:21