prikaz prve stranice dokumenta TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA
  Download
PDF 3.9 MB
master's thesis
TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA
Karlovac: Karlovac University of Applied Sciences, 2024. urn:nbn:hr:128:565315
Arlov, Nino
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Arlov, N. (2024). TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA (Master's thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:565315

Arlov, Nino. "TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA." Master's thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:565315

Arlov, Nino. "TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA." Master's thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:565315

Arlov, N. (2024). 'TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA', Master's thesis, Karlovac University of Applied Sciences, accessed 05 September 2024, https://urn.nsk.hr/urn:nbn:hr:128:565315

Arlov N. TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA [Master's thesis]. Karlovac: Karlovac University of Applied Sciences; 2024 [cited 2024 September 05] Available at: https://urn.nsk.hr/urn:nbn:hr:128:565315

N. Arlov, "TRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA", Master's thesis, Karlovac University of Applied Sciences, Karlovac, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:128:565315

Metadata
TitleTRIBOLOŠKA SVOJSTVA POLIMERNIH MATERIJALA
Title (english)TRIBOLOGICAL PROPERTIES OF POLYMERS
AuthorNino Arlov
MentorTihana Kostadin (mentor)
Committee memberNikola Šimunić (predsjednik povjerenstva)
Committee memberFilip Žugčić (član povjerenstva)
Committee memberTihana Kostadin (član povjerenstva)
Committee memberBarica Jurković (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2024-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad se sastoji od dva dijela, teorijskog i eksperimentalnog. U teorijskom dijelu radu opisana su polimerni materijali i njihova svojstva osobito tribološka svojstva, opisana je obrada odvajanjem čestica kod polimernih materijala s posebnim naglaskom na glodanje polimera. Opisane su stezne naprave i njihova primjena. U eksperimentalnom dijelu rada provedena je cjelokupna tehnologija izrade testnih uzoraka nabava materijala, izrada CAM programa za strojnu obradu uzoraka i sama strojna obrada. Zatim proračun steznih sila za pritezanje uzoraka koristeći se referentnim vrijednostima dobivenih iz nabavnog kataloga materijala uzoraka. Nakon toga napravljeno je 3D skeniranje uzoraka kako bi se provjerile i usporedile vrijednosti deformacija nastalih na uzorcima prilikom stezanja. Na temelju svih informacija izveden je zaključak o ovom radu.
Abstract (english)
The thesis consists of two parts, theoretical and experimental. In the theoretical part of the work, polymer materials and their properties, especially tribological properties, are described, the processing of polymer materials by particle separation is described, with a special emphasis on polymer milling. Clamping devices and their application are described. In the experimental part of the work, the entire technology of making test samples, procurement of materials, creation of a CAM program for machine processing of samples and the machine processing itself were carried out. Then the calculation of the clamping forces for tightening the samples using the reference values obtained from the procurement catalog of sample materials. After that, a 3D scan of the samples was made in order to check and compare the values of the deformations that occurred on the samples during clamping. Based on all the information, a conclusion was drawn about this work.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:565315
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva (stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-08-22 08:56:09