prikaz prve stranice dokumenta UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE
  Download
PDF 2.66 MB
master's thesis
UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE
Karlovac: Karlovac University of Applied Sciences, 2024. urn:nbn:hr:128:917141
Salopek, Sandi
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Salopek, S. (2024). UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE (Master's thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:917141

Salopek, Sandi. "UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE." Master's thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:917141

Salopek, Sandi. "UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE." Master's thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:917141

Salopek, S. (2024). 'UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE', Master's thesis, Karlovac University of Applied Sciences, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:128:917141

Salopek S. UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE [Master's thesis]. Karlovac: Karlovac University of Applied Sciences; 2024 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:128:917141

S. Salopek, "UTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE", Master's thesis, Karlovac University of Applied Sciences, Karlovac, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:128:917141

Metadata
TitleUTJECAJ MATERIJALA I TEHNOLOGIJE OBRADE NA HRAPAVOST POVRŠINE
Title (english)INFLUENCE OF MATERIAL AND TECHNOLOGIES ON THE SURFACE ROUGHNESS
AuthorSandi Salopek
MentorTihana Kostadin (mentor)
Committee memberNikola Šimunić (predsjednik povjerenstva)
Committee memberFilip Žugčić (član povjerenstva)
Committee memberTihana Kostadin (član povjerenstva)
Committee memberBarica Jurković (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2024-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj diplomski rad stastavljen je od dva dijela, teorijskog i eksperimentalnog. Unutar teorijskog dijela, opisane su tehnologije obrade odvajanjem čestica i aditivna tehnologija. Nakon opisa tehnologija, opisana je hrapavost površina prema kojoj se mjere izrađeni uzorci opisani prethodnim tehnologijama. Eksperimentalni dio, proveden kao drugi dio rada, započinje konstruiranjem uzoraka koji će biti izrađeni aditivnom tehnologijom i obradom odvajanja čestica. Uzorci izrađeni obradom odvajanjem čestica su od aluminijske legure, dok se aditivnom tehnologijom izrađuju polimerni uzorci. Analizom rezultata uspoređuju se vremena izrade uzoraka, njihova hrapavost i ukupni trošak izrade uzorka. Ovim radom se prikazuje isplativost odabira određene tehnolgije u ovisnosti o postavljenim konstrukcijskim zahtjevima za izradu proizvoda.
Abstract (english)
This master thesis is made up of two parts, the theoretical and the experimental. Within the theoretical part, processing technologies of machining and additive manufacturing are described in it. After description of the technologies, the roughness of the surfaces is described, according to which the samples made using the previous technologies are measured. The experimental part carried out as the second part of the work begins with the construction of samples that will be made using additive technology and machining. Samples made by machining are made of aluminum alloy, while polymer samples are made by additive manufacturing. The analysis of the results compares the time of making the samples, their roughness and the total cost of making the sample. This paper shows the profitability of choosing a certain technology depending on the set design requirements for the production of the product.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:917141
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva (stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-08-22 09:07:06