prikaz prve stranice dokumenta PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE
  Download
PDF 3.69 MB
undergraduate thesis
PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE
Karlovac: Karlovac University of Applied Sciences, 2024. urn:nbn:hr:128:981272
Stojković, Luka
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Stojković, L. (2024). PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:981272

Stojković, Luka. "PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE." Undergraduate thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:981272

Stojković, Luka. "PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE." Undergraduate thesis, Karlovac University of Applied Sciences, 2024. https://urn.nsk.hr/urn:nbn:hr:128:981272

Stojković, L. (2024). 'PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:128:981272

Stojković L. PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2024 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:128:981272

L. Stojković, "PROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:128:981272

Metadata
TitlePROJEKTIRANJE TEHNOLOŠKOG PROCESA TURBINSKE LOPATICE
Title (english)DESIGNING THE TECHNOLOGICAL PROCESS OF THE TURBINE BLADE
AuthorLuka Stojković
MentorDenis Kotarski (mentor)
Committee memberVedran Vyroubal (predsjednik povjerenstva)
Committee memberAdam Stančić (član povjerenstva)
Committee memberDenis Kotarski (član povjerenstva)
Committee memberNatalija Kusanić Belinić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2024-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tehnološki proces izrade turbinske lopatice je točno određen postupak. Postupak sadrži slijed po kojem se izrađuje neki proizvod iz osnovnog materijala. Tehnološki proces mora sadržavati slijedeće uvijete: izbor alata, izbor naprava, izbor strojeva, u zadanom vremenu. Jedan od osnovnih zadataka je tehnološki proces oblikovati, da bude što jasniji tijekom svake operacije u proizvodnji, svaki djelatnik ga mora čitati i shvatiti isto. Nužan je kako bi proizvodni proces bio ujednačene kvalitete tijekom cijelog ciklusa. Tehnološki proces mora slijediti konstantna poboljšanja, kako bi s vremenom mogli povećati produktivnost te pojednostaviti djelatnicima radne zadatke. Tehnološki proces nije nikada dovoljno dobro projektiran da se ne može unaprijediti. Svaki tehnološki proces mora sadržavati sljedeće zahtjeve: tehničke i ekonomske. Tehnički uvjet kao polazna točka proizlazi iz tehničke dokumentacije odnosno funkcije pojedinog dijela sklopa ili stroja. Pod tehničke uvijete spadaju: vrsta materijala, tolerancijska polja , kvaliteta površine, broj komada i hrapavost. Ekonomski uvjeti se ne smiju zanemarivati, oni zahtijevaju od tehnološkog procesa da uzme u obzir ekonomsko analizu koja je potrebna za izradu tehnološkog procesa. Tijekom svakog dijela izrade tehnološkog procesa je potrebno voditi računa o ekonomskoj analizi kako bi troškovi koji nastaju izradom proizvoda bili što manji to jest minimalni da zadovoljavaju kvalitetu koja se traži tijekom cijelog tehnološkog procesa. Cilj ovog rada je prikazati izradu tehnološkog procesa turbinske lopatice
Abstract (english)
The technological process of manufacturing a turbine blade is a precisely defined procedure, outlining the sequence in which a product is made from raw material using specific tools, fixtures, machines, and within a given timeframe. One of the primary objectives is to design the technological process in a way that it is clear and consistent during every operation, ensuring that each employee interprets and understands it in the same way. This is essential for maintaining uniform quality throughout the production cycle. The technological process must also incorporate continuous improvements to enhance productivity over time and simplify tasks for workers. A technological process is never perfectly designed; there is always room for further optimization. Every technological process must meet both technical and economic requirements. Technical requirements, derived from the technical documentation and the function of each component or machine, include factors such as material type, tolerance fields, surface quality, and the number of pieces. Economic considerations, which must not be overlooked, require the technological process to take into account the necessary economic analysis. This analysis is crucial throughout the process to minimize production costs while ensuring the required quality is maintained across the entire technological process. The goal of this work is to present the development of the technological process for manufacturing a turbine blade.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:981272
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-17 13:48:46