prikaz prve stranice dokumenta Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem
  Download
PDF 6.87 MB
undergraduate thesis
Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem
Karlovac: Karlovac University of Applied Sciences, 2018. urn:nbn:hr:128:543710
Šaravanja, Dario
Karlovac University of Applied Sciences
The Department of Safety and Protection

Institutional repository: Repository of Karlovac University of Applied Sciences

Cite this document

Šaravanja, D. (2018). Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:543710

Šaravanja, Dario. "Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:543710

Šaravanja, Dario. "Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:543710

Šaravanja, D. (2018). 'Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:128:543710

Šaravanja D. Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2018 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:128:543710

D. Šaravanja, "Zaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:128:543710

Metadata
TitleZaštita radnika pri uporabi strojeva i uređaja u procesu obrade metala brušenjem
Title (english)Protection of workers for using machines and devices in metal processing company
AuthorDario Šaravanja
MentorNikola Trbojević (mentor)
Committee memberZvonimir Matusinović (predsjednik povjerenstva)
Committee memberJasna Sabljarić (član povjerenstva)
Committee memberIvan Štedul (član povjerenstva)
Committee memberNikola Trbojević (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Safety and Protection)
Karlovac
Defense date and country2018-02-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Abstract
Brušenje je vrlo značajan postupak obrade odvajanjem čestica koji je oduvijek poznat po svojoj točnosti i kvaliteti obrađene površine. U prošlosti brušenje se koristilo samo kod završne obrade za dobivanje visoke kvalitete, no razvojem tehnologija i novih materijala, brušenje dobiva novu dimenziju obrade odvajanjem čestica, a to je visoka proizvodnost. Tako danas postoji širok spektar postupaka obrade odvajanjem čestica koji istovremeno postižu visoku kvalitetu i visoku proizvodnost, pa sama primjena pojedinih postupka postaje neodređena. U ovom radu bit će navedeni i opisani neki suvremeni postupci brušenja orijentirani na povećanje proizvodnosti. Detaljnije će biti opisan postupak dubokog brušenja, te će se za konkretnu brusilicu eksperimentalno odrediti granična proizvodnost, odnosno granični učin brušenja s obzirom na reznu površinu brusa za dva različita materijala obratka.
Abstract (english)
Grinding is a very important process of processing by separating particle that has always been known for its accuracy and the quality of treated surface. In the past it is grinding used only in final finishing to obtain high quality but development technology and new materials, grinding gets a new dimension of machining by separation particle, which is high productivity. Thus, there is a wide range of procedures today processing by separating particles that at the same time achieve high quality and high productivity, so the application of certain procedures becomes indefinite. In this paper some modern methods of grinding will be described and described oriented towards increasing productivity. More detailed description will be described as a deep procedure grinding, and the concrete grinder will experimentally be defined as a borderline the productivity, or the bridging effect of the sanding with respect to the grinding surface for two different material moves.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:128:543710
Study programmeTitle: Security and Protection Studies
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka sigurnosti i zaštite (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka sigurnosti i zaštite)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-07-17 09:02:51