prikaz prve stranice dokumenta Izrada stožnika s ravnim zubima
Access restricted to students and staff of home institution
undergraduate thesis
Izrada stožnika s ravnim zubima
Slavonski Brod: College of Slavonski Brod, 2017. urn:nbn:hr:174:392337
Aničić, Denis
College of Slavonski Brod
Technical Department

Institutional repository: Repository of College of Slavonski Brod

Cite this document

Aničić, D. (2017). Izrada stožnika s ravnim zubima (Undergraduate thesis). Slavonski Brod: College of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:174:392337

Aničić, Denis. "Izrada stožnika s ravnim zubima." Undergraduate thesis, College of Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:174:392337

Aničić, Denis. "Izrada stožnika s ravnim zubima." Undergraduate thesis, College of Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:174:392337

Aničić, D. (2017). 'Izrada stožnika s ravnim zubima', Undergraduate thesis, College of Slavonski Brod, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:174:392337

Aničić D. Izrada stožnika s ravnim zubima [Undergraduate thesis]. Slavonski Brod: College of Slavonski Brod; 2017 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:174:392337

D. Aničić, "Izrada stožnika s ravnim zubima", Undergraduate thesis, College of Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:174:392337

Metadata
TitleIzrada stožnika s ravnim zubima
Title (english)Production of a conical flat toothed gear
AuthorDenis Aničić
MentorMarija Stoić (mentor)
Committee memberJosip Jukić (predsjednik povjerenstva)
Committee memberMarija Stoić (član povjerenstva)
Committee memberIvica Lacković (član povjerenstva)
GranterCollege of Slavonski Brod
(Technical Department)
Slavonski Brod
Defense date and country2017-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Rad opisuje izradu zupčanika s ravnim zubima. U uvodnom dijelu rada opisan je općeniti dio stoţastih zupčanika, gdje se primjenjuju, kakve vrste postoje, prednosti i nedostatci stoţastih zupčanika. Opisani su i svi postupci obrade odvajanjem čestica koji su korišteni pri izradi. Opisan je slijed tehnoloških operacija kojima se od početnog materijala (šipke) dolazi do stoţastog zupčanika. Navedena je toplinska obrada koja je upotrijebljena za izradu stoţastog zupčanika s ravnim zubima. Eksperimentalnim putem utvrĎeno je kako izrada stoţnika s ravnim zubima zahtjeva dosta vremena za odabir materijala i njegovu izradu.
Abstract (english)
This paper describes production procedure of a conical flat toothed gear. Introduction part of this paper describes conical gears in general, describes where conical gears are used, what types exist and what are their advantages and disadvantages. Next chapter describes all types of metal cutting procedures used in production of conical flat toothed gear. Sequence of all technological operations used in order to get a conical gear from raw material (rod) is also described. Heat treatment used to get final product is mentioned next. Using experimental procedure it was identified that production of a conical flat toothed gear takes a lot of time for selecting right materials and for the production.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:174:392337
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-07-17 09:07:49