prikaz prve stranice dokumenta Numerička simulacija dinamike klipa i klipnih prstena
  Download
PDF 14.06 MB
master's thesis
Numerička simulacija dinamike klipa i klipnih prstena
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:758581
Putarek, Ljudevit
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Putarek, Lj. (2019). Numerička simulacija dinamike klipa i klipnih prstena (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:758581

Putarek, Ljudevit. "Numerička simulacija dinamike klipa i klipnih prstena." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:758581

Putarek, Ljudevit. "Numerička simulacija dinamike klipa i klipnih prstena." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:758581

Putarek, Lj. (2019). 'Numerička simulacija dinamike klipa i klipnih prstena', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:758581

Putarek Lj. Numerička simulacija dinamike klipa i klipnih prstena [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:758581

Lj. Putarek, "Numerička simulacija dinamike klipa i klipnih prstena", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:758581

Metadata
TitleNumerička simulacija dinamike klipa i klipnih prstena
Title (english)Simulation of piston and piston ring dymanics
AuthorLjudevit Putarek
MentorDarko Kozarac (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-05-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Trenje izazvano radom klipnog mehanizama doprinosi 40% do 50% ukupnom trenju motora s unutarnjim izgaranjem. Proizvođači automobila traže učinkovite metode u smanjenju trenja bez nedostataka u izdržljivosti, buci i vibracijama. S obzirom na to, efikasno ispitivanje parametara i optimizacije simulacijskih modela dobiva sve više na važnosti. Cilj rada istražiti je razlike u rezultatima između simulacije i mjerenja provedenih na motoru AVL FRISC. AVL FRISC je jednocilindarski motor s unutarnjim izgaranjem konstruiran za proučavanje rezultata dinamike klipa i klipnih prstena s naglaskom na rezultate sile trenja, bočne sile klipa, srednjeg tlaka trenja, potrošnje ulja klipnog mehanizma i prestrujavanja zraka u donji dio kućišta motora (blow-by). Simulacijski modeli izrađeni su u programima AVL EXCITE™ Piston&Ring i AVL EXCITE™ Power Unit. U programu AVL EXCITE™ Piston&Ring izrađena su dva modela koji se razlikuju s obzirom na korišteni paket klipnih prstena, osnovni paket klipnih prstena i paket klipnih prstena sa smanjenim trenjem. Također, izrađeni su modeli koji se razlikuju u pristupu rješavanja simulacijskog modela: pojednostavljeni pristup ili 2D te napredniji pristup ili 3D. Rezultati potrošnje ulja klipnog mehanizma, prestujavanja zraka, dinamike klipnih prstena i gubitaka trenja klipnih prstena dobiveni su simulacijom u programu AVL EXCITE™ Piston&Ring. Proučavanje ukupnih gubitaka tlaka trenja klipnog mehanizma, sile trenja i bočne sile na klip provedeno je u programu AVL EXCITE™ Power Unit s osnovnim paketom klipnih prstena i paketom klipnih prstena sa smanjenim trenjem. Simulacijski modeli izrađeni su na pojednostavljen i napredan način. Pojednostavljeni model koristi REVO spoj, dok napredan model koristi EHD spoj. Prikazani su rezultati dinamike klipa, gubitci trenja klipa, sile trenja i bočne sile na klipu. Dostupna su mjerenja potrošnje ulja, prestrujavanja zraka, sile trenja, bočne sile na klipu i srednjeg tlaka trenja, kao i njihova usporedba sa simulacijskim rezultatima. Na kraju je prikazan utjecaj parametara na usklađivanje simulacijskog modela i mjerenja.
Abstract (english)
Piston group is the main contributor to friction with an amount of 40%-50% of the total IC engine friction. The market is looking for efficient friction reduction methods without drawbacks in durability and NVH. In light of this, efficient parameter studies and optimization processes in multibody dynamics simulation are becoming increasingly important and must be setup. The aim of this thesis is to investigate the differences in the results of simulation and measurement on the AVL FRISC engine. The AVL FRISC (FRIction Single Cylinder) engine is a research IC engine designed for the investigation of piston and piston ring dynamics in view of measuring friction force side force, friction mean effective pressure (FMEP), lube oil consumption (LOC) and blow-by values. Simulation models are built in the AVL EXCITE™ Piston&Ring and AVL EXCITE™ Power Unit software’s. In EXCITE™ Piston&Ring, models with two different piston ring packages (basic and low friction package) are created for different simulation solvers: simplified (2D) and advanced (3D) solver. The differences between the basic and low friction ring package is in the tangential force. The results of LOC, blow-by, piston ring dynamics and piston ring friction losses are given by the AVL EXCITE™ Piston&Ring software. To investigate the total FMEP values of piston group, friction force and side force, AVL EXCITE™ Power Unit models are created for a basic and low friction package. Simulation models are also created with a simplified and advanced approach. Revolute Joints (REVO) are used in the simplified approach, whereas Elasto-Hydrodynamic journal sliding bearing (EHD2) is used in the advanced approach. The results of piston dynamics, piston friction losses, friction and side force are presented. For the simulated AVL FRISC engine, the measurements of LOC, blow-by, FMEP, friction and side forces are available and simulation results are compared with the available measurements. Finally, a study on tuning parameters for results correlation and sensitivity of tuning parameters is presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:758581
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-02-02 16:25:09