prikaz prve stranice dokumenta Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
  Download
PDF 1014.55 KB
Scientific paper - Original scientific paper
Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
International Journal for Engineering Modelling, 35 (2022), 2; 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m
Senjanović, Ivo; Čakmak, Damjan; Alujević, Neven; Vladimir, Nikola; Ćatipović, Ivan

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Senjanović, I., Čakmak, D., Alujević, N., Vladimir, N. & Ćatipović, I. (2022). Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment. International Journal for Engineering Modelling, 35. (2), 91-121. doi: 10.31534/engmod.2022.2.ri.06m

Senjanović, Ivo, et al. "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment." International Journal for Engineering Modelling, vol. 35, no. 2, 2022, pp. 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m

Senjanović, Ivo, Damjan Čakmak, Neven Alujević, Nikola Vladimir and Ivan Ćatipović. "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment." International Journal for Engineering Modelling 35, no. 2 (2022): 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m

Senjanović, I., et al. (2022) 'Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment', International Journal for Engineering Modelling, 35(2), pp. 91-121. doi: 10.31534/engmod.2022.2.ri.06m

Senjanović I, Čakmak D, Alujević N, Vladimir N, Ćatipović I. Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment. International Journal for Engineering Modelling [Internet]. 2022 November 28 [cited 2024 June 15];35(2):91-121. doi: 10.31534/engmod.2022.2.ri.06m

I. Senjanović, D. Čakmak, N. Alujević, N. Vladimir and I. Ćatipović, "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment", International Journal for Engineering Modelling, vol. 35, no. 2, pp. 91-121, November 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:235:315298. [Accessed: 15 June 2024]

Metadata
Title (english)Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
AuthorIvo Senjanović
AuthorDamjan Čakmak
AuthorNeven Alujević
AuthorNikola Vladimir
AuthorIvan Ćatipović
Author's institutionUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Shipbuilding
Abstract (english)
A physics-based mathematical model for the simulation of contact-induced standing waves in rotating tyres is presented. A toroidal balloon mounted on a hub, in contact with a rigid flywheel, is considered. The distance between the hub and the flywheel shafts is kept constant during rotation. The balloon is modelled as a membrane structure, i.e. as a ring on elastic support without flexural stiffness. The differential equations of motion for the ring radial and circumferential displacements are formulated according to the cylindrical shell theory. It is found that the critical rotation speed is a transition parameter from a stable to unstable state, whereas the standing waves denote ring post-buckling behaviour. Boundary conditions at the ring and flywheel contact edges are specified so as to ensure the continuity of ring deformation. The internal load due to the penetration of the flywheel into the expanded ring, as well as the reaction forces in shaft bearings, are determined. The influence of the circumferential displacement on ring response is also analysed. The analytical procedure is verified by comparing the numerical and the available experimental results. In spite of a rather simple balloon model, a good qualitative agreement between the two sets of results is obtained.
Keywords (english)
Languagecroatian
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleInternational Journal for Engineering Modelling
Numberingvol. 35, no. 2, pp. 91-121
p-ISSN1330-1365
e-ISSN1849-8671
DOIhttps://doi.org/10.31534/engmod.2022.2.ri.06m
URN:NBNurn:nbn:hr:235:315298
Publication2022-11-28
Document URLhttps://hrcak.srce.hr/286232
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-05-22 08:43:08