prikaz prve stranice dokumenta Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
  Preuzmi
PDF 1014.55 KB
Znanstveni rad - Izvorni znanstveni rad
Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
International Journal for Engineering Modelling, 35 (2022), 2; 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m
Senjanović, Ivo; Čakmak, Damjan; Alujević, Neven; Vladimir, Nikola; Ćatipović, Ivan

Institucijski repozitorij: Repozitorij Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu

Citirajte ovaj rad

Senjanović, I., Čakmak, D., Alujević, N., Vladimir, N. i Ćatipović, I. (2022). Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment. International Journal for Engineering Modelling, 35. (2), 91-121. doi: 10.31534/engmod.2022.2.ri.06m

Senjanović, Ivo, et al. "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment." International Journal for Engineering Modelling, vol. 35, br. 2, 2022, str. 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m

Senjanović, Ivo, Damjan Čakmak, Neven Alujević, Nikola Vladimir i Ivan Ćatipović. "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment." International Journal for Engineering Modelling 35, br. 2 (2022): 91-121. https://doi.org/10.31534/engmod.2022.2.ri.06m

Senjanović, I., et al. (2022) 'Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment', International Journal for Engineering Modelling, 35(2), str. 91-121. doi: 10.31534/engmod.2022.2.ri.06m

Senjanović I, Čakmak D, Alujević N, Vladimir N, Ćatipović I. Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment. International Journal for Engineering Modelling [Internet]. 28.11.2022. [pristupljeno 05.11.2024.];35(2):91-121. doi: 10.31534/engmod.2022.2.ri.06m

I. Senjanović, D. Čakmak, N. Alujević, N. Vladimir i I. Ćatipović, "Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment", International Journal for Engineering Modelling, vol. 35, br. 2, str. 91-121, Studeni 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:235:315298. [Citirano: 05.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:235:315298
Podaci o radu
Naslov (engleski)Mathematical Model for the Simulation of Contact-Induced Standing Waves in Tyres by a Rotating Ring Based on Experiment
AutorIvo Senjanović
AutorDamjan Čakmak
AutorNeven Alujević
AutorNikola Vladimir
AutorIvan Ćatipović
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Brodogradnja
Sažetak (engleski)
A physics-based mathematical model for the simulation of contact-induced standing waves in rotating tyres is presented. A toroidal balloon mounted on a hub, in contact with a rigid flywheel, is considered. The distance between the hub and the flywheel shafts is kept constant during rotation. The balloon is modelled as a membrane structure, i.e. as a ring on elastic support without flexural stiffness. The differential equations of motion for the ring radial and circumferential displacements are formulated according to the cylindrical shell theory. It is found that the critical rotation speed is a transition parameter from a stable to unstable state, whereas the standing waves denote ring post-buckling behaviour. Boundary conditions at the ring and flywheel contact edges are specified so as to ensure the continuity of ring deformation. The internal load due to the penetration of the flywheel into the expanded ring, as well as the reaction forces in shaft bearings, are determined. The influence of the circumferential displacement on ring response is also analysed. The analytical procedure is verified by comparing the numerical and the available experimental results. In spite of a rather simple balloon model, a good qualitative agreement between the two sets of results is obtained.
Ključne riječi (engleski)
Jezikhrvatski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaInternational Journal for Engineering Modelling
Brojčani podacivol. 35, br. 2, str. 91-121
p-ISSN1330-1365
e-ISSN1849-8671
DOIhttps://doi.org/10.31534/engmod.2022.2.ri.06m
URN:NBNurn:nbn:hr:235:315298
Datum objave publikacije2022-11-28
URL dokumentahttps://hrcak.srce.hr/286232
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-05-22 08:43:08