prikaz prve stranice dokumenta The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors
  Download
PDF 5.53 MB
Scientific paper - Original scientific paper
The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors
Materials, 17 (2024), 3; 1-12. https://doi.org/10.3390/ma17030710
Rodinger, Tomislav; Ćorić, Danko; Kováčik, Jaroslav

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Rodinger, T., Ćorić, D. & Kováčik, J. (2024). The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors. Materials, 17. (3), 1-12. doi: 10.3390/ma17030710

Rodinger, Tomislav, et al. "The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors." Materials, vol. 17, no. 3, 2024, pp. 1-12. https://doi.org/10.3390/ma17030710

Rodinger, Tomislav, Danko Ćorić and Jaroslav Kováčik. "The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors." Materials 17, no. 3 (2024): 1-12. https://doi.org/10.3390/ma17030710

Rodinger, T., Ćorić, D. and Kováčik, J. (2024) 'The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors', Materials, 17(3), pp. 1-12. doi: 10.3390/ma17030710

Rodinger T, Ćorić D, Kováčik J. The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors. Materials [Internet]. 2024 February 01 [cited 2024 June 30];17(3):1-12. doi: 10.3390/ma17030710

T. Rodinger, D. Ćorić and J. Kováčik, "The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors", Materials, vol. 17, no. 3, pp. 1-12, February 2024. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:235:512312. [Accessed: 30 June 2024]

Metadata
Title (english)The Effect of Foaming Agents on the Thermal Behavior of Aluminum Precursors
AuthorTomislav Rodinger
AuthorDanko Ćorić
AuthorJaroslav Kováčik
Author's institutionUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
(Department of Materials)
(Chair of Materials and Tribology)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract (english)
Various foaming agents can be used to achieve foaming of the precursors obtained by using the powder metallurgy method. However, the thermal behavior of pure aluminum precursors with different foaming agents has been studied very little in recent times. For the production of aluminum foams with closed cells, 1 wt.% of calcium carbonate (CaCO3), titanium hydride (TiH2), heat-treated TiH2 and zirconium hydride (ZrH2) were used. The foaming capability of the compacted precursors was investigated at temperatures 700, 720 and 750 °C. CaCO3 and TiH2 showed the best foamability at all considered temperatures, while ZrH2 achieved relatively good foaming only at the highest temperature, 750 °C. Due to their low onset temperature of the decomposition compared to the melting point of the unalloyed aluminum, in hydride-based foaming agents the drainage occurred at the bottom part of the foam samples. Among the investigated foaming agents, precursors with heat-treated TiH2 had the worst foaming properties, while CaCO3 showed the best foamability without the occurrence of drainage.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionAccepted version
Journal titleMaterials
Numberingvol. 17, no. 3, pp. 1-12, 710
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma17030710
URN:NBNurn:nbn:hr:235:512312
Publication2024-02-01
Document URLhttps://www.mdpi.com/1996-1944/17/3/710
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-05-22 11:08:30