prikaz prve stranice dokumenta Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
  Download
PDF 4.83 MB
Scientific paper - Original scientific paper
Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
Materials, 12 (2019), 11; 1-16. https://doi.org/10.3390/ma12111738
Vukšić, Milan; Žmak, Irena; Ćurković, Lidija; Ćorić, Danko

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Vukšić, M., Žmak, I., Ćurković, L. & Ćorić, D. (2019). Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design. Materials, 12. (11), 1-16. doi: 10.3390/ma12111738

Vukšić, Milan, et al. "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design." Materials, vol. 12, no. 11, 2019, pp. 1-16. https://doi.org/10.3390/ma12111738

Vukšić, Milan, Irena Žmak, Lidija Ćurković and Danko Ćorić. "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design." Materials 12, no. 11 (2019): 1-16. https://doi.org/10.3390/ma12111738

Vukšić, M., et al. (2019) 'Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design', Materials, 12(11), pp. 1-16. doi: 10.3390/ma12111738

Vukšić M, Žmak I, Ćurković L, Ćorić D. Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design. Materials [Internet]. 2019 May 29 [cited 2024 July 13];12(11):1-16. doi: 10.3390/ma12111738

M. Vukšić, I. Žmak, L. Ćurković and D. Ćorić, "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design", Materials, vol. 12, no. 11, pp. 1-16, May 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:235:852498. [Accessed: 13 July 2024]

Metadata
Title (english)Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
AuthorMilan Vukšić
AuthorIrena Žmak
AuthorLidija Ćurković
AuthorDanko Ćorić
Author's institutionUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
(Department of Materials)
(Chair of Materials and Tribology)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Precision Mechanical Engineering
Abstract (english)
The green machining of alumina (Al2O3) green bodies generates a certain amount of waste alumina powder. Waste alumina ceramic powder should be disposed of as non-hazardous waste in a legally compliant manner. The influence of additives on the stability of 70 wt.% (≈40 vol.%) alumina—waste alumina water-based suspension was investigated in the presented research. A Box-Behnken three-factor response surface design was used for the preparation of stable highly-concentrated suspensions with the addition of three additives. The optimal amount of each additive was selected according to the obtained results of minimal apparent viscosity: 0.05 wt.% Tiron as dispersant, 0.1 wt.% poly (vinyl alcohol) as binder and 0.2 wt.% magnesium aluminate spinel as abnormal grain growth inhibitor. The analysis of variance was used to identify the contribution of each additive. The zeta potential and sedimentations tests were performed to confirm the suspension stability measurements at different pH values. Alumina particles were optimally dispersed at pH values between 8 and 11. According to the results, the investigated composition of 20 wt.% waste alumina powder (weight content, dry alumina powder), with the addition of optimal amounts of additives, shows a possible application in the production of ceramics by slip casting.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionAccepted version
Journal titleMaterials
Numberingvol. 12, no. 11, pp. 1-16, 1738
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma12111738
URN:NBNurn:nbn:hr:235:852498
Publication2019-05-29
Document URLhttps://www.mdpi.com/1996-1944/12/11/1738
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-05-22 12:14:00