prikaz prve stranice dokumenta Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
  Preuzmi
PDF 4.83 MB
Znanstveni rad - Izvorni znanstveni rad
Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
Materials, 12 (2019), 11; 1-16. https://doi.org/10.3390/ma12111738
Vukšić, Milan; Žmak, Irena; Ćurković, Lidija; Ćorić, Danko

Institucijski repozitorij: Repozitorij Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu

Citirajte ovaj rad

Vukšić, M., Žmak, I., Ćurković, L. i Ćorić, D. (2019). Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design. Materials, 12. (11), 1-16. doi: 10.3390/ma12111738

Vukšić, Milan, et al. "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design." Materials, vol. 12, br. 11, 2019, str. 1-16. https://doi.org/10.3390/ma12111738

Vukšić, Milan, Irena Žmak, Lidija Ćurković i Danko Ćorić. "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design." Materials 12, br. 11 (2019): 1-16. https://doi.org/10.3390/ma12111738

Vukšić, M., et al. (2019) 'Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design', Materials, 12(11), str. 1-16. doi: 10.3390/ma12111738

Vukšić M, Žmak I, Ćurković L, Ćorić D. Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design. Materials [Internet]. 29.05.2019. [pristupljeno 26.12.2024.];12(11):1-16. doi: 10.3390/ma12111738

M. Vukšić, I. Žmak, L. Ćurković i D. Ćorić, "Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design", Materials, vol. 12, br. 11, str. 1-16, Svibanj 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:235:852498. [Citirano: 26.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:235:852498
Podaci o radu
Naslov (engleski)Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design
AutorMilan Vukšić
AutorIrena Žmak
AutorLidija Ćurković
AutorDanko Ćorić
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
(Zavod za materijale)
(Katedra za materijale i tribologiju)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Strojarstvo
Precizno strojarstvo
Sažetak (engleski)
The green machining of alumina (Al2O3) green bodies generates a certain amount of waste alumina powder. Waste alumina ceramic powder should be disposed of as non-hazardous waste in a legally compliant manner. The influence of additives on the stability of 70 wt.% (≈40 vol.%) alumina—waste alumina water-based suspension was investigated in the presented research. A Box-Behnken three-factor response surface design was used for the preparation of stable highly-concentrated suspensions with the addition of three additives. The optimal amount of each additive was selected according to the obtained results of minimal apparent viscosity: 0.05 wt.% Tiron as dispersant, 0.1 wt.% poly (vinyl alcohol) as binder and 0.2 wt.% magnesium aluminate spinel as abnormal grain growth inhibitor. The analysis of variance was used to identify the contribution of each additive. The zeta potential and sedimentations tests were performed to confirm the suspension stability measurements at different pH values. Alumina particles were optimally dispersed at pH values between 8 and 11. According to the results, the investigated composition of 20 wt.% waste alumina powder (weight content, dry alumina powder), with the addition of optimal amounts of additives, shows a possible application in the production of ceramics by slip casting.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeZavršna verzija rukopisa prihvaćena za objavljivanje (postprint)
Naslov časopisaMaterials
Brojčani podacivol. 12, br. 11, str. 1-16, 1738
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma12111738
URN:NBNurn:nbn:hr:235:852498
Datum objave publikacije2019-05-29
URL dokumentahttps://www.mdpi.com/1996-1944/12/11/1738
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-05-22 12:14:00