prikaz prve stranice dokumenta Optimizacija procesa izmjene alata
  Download
PDF 33.03 MB
undergraduate thesis
Optimizacija procesa izmjene alata
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:011588
Gregurić, Petar
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Gregurić, P. (2017). Optimizacija procesa izmjene alata (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:011588

Gregurić, Petar. "Optimizacija procesa izmjene alata." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:011588

Gregurić, Petar. "Optimizacija procesa izmjene alata." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:011588

Gregurić, P. (2017). 'Optimizacija procesa izmjene alata', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 26 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:011588

Gregurić P. Optimizacija procesa izmjene alata [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 August 26] Available at: https://urn.nsk.hr/urn:nbn:hr:235:011588

P. Gregurić, "Optimizacija procesa izmjene alata", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:011588

Metadata
TitleOptimizacija procesa izmjene alata
Title (english)Tool changes process optimization
AuthorPetar Gregurić
MentorNedeljko Štefanić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U današnje vrijeme povećanje efikasnosti i efektivnosti proizvodnje jedno je od najvećih globalnih problema. Cilj svake grupacije, organizacije ili poduzeća je vrlo jasan - uspjeti. Lean je prije svega filozofija, a tek onda alatnica moćnih alata. Kako bi se lean metode shvatile, a nakon toga i uspješno primijenile, krucijalno je u potpunosti ući u taj način razmišljanja. Treba uključit svakog pojedinca, slušati bazu, a kako bi se dostigao taj nivo razvitka, nužno je da poduzeća vode lean menadžeri. SMED, jedan je od najmoćnijih lean alata. SMED je sustav za smanjenje vremena izvršenja promjene opreme. Bit SMED sustava je pretvoriti što više koraka promjene opreme u eksterne, odnosno, one koji se mogu odvijati tijekom rada opreme te pojednostaviti i ubrzati preostale korake. Samo ime SMED je akronim engleskih riječi single minute exchange of die, u prijevodu smanjenje svih vremena promjene na jednoznamenkastu vremensku jedinicu (single digit). U ovom radu primjenio sam SMED metoda na procesu izmjene alata kod tokarilice u poduzeću Feroimpex. Implementaciju možemo smatrati uspješnom pošto smo vrijeme izmjene smanjili za 38,6%.
Abstract (english)
In these days increasing efficiency and productivity is crucial in getting ahead of competitors. Goal of every company or organisation is to succeed. Lean is primary a philosophy and after that set of powerful tools. To understand lean methods, one first needs to understand its way of thinking. Every individual, from bottom to top, must be included in lean cycle, for it to be successful. For this to happen, new ere of lean managers has to happen. SMED is one of the most powerful lean tools. It is a system for dramatically reducing the time it takes to complete equipment changeovers. The essence of the SMED system is to convert as many changeover steps as possible to “external” (performed while the equipment is running), and to simplify and streamline the remaining steps. The name Single-Minute Exchange of Dies comes from the goal of reducing changeover times to the “single” digits (i.e. less than 10 minutes). In this seminar, I implemented SMED in company called Feroimpex. SMED was applied to tool changeover in the lathe machine. The operation was successful since we had reduced changeover time for 38,6%.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:011588
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 19:08:56