prikaz prve stranice dokumenta Projektiranje tokarilice za obradu drva
  Download
PDF 3.12 MB
undergraduate thesis
Projektiranje tokarilice za obradu drva
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:929003
Tušek, Darko
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Tušek, D. (2019). Projektiranje tokarilice za obradu drva (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:929003

Tušek, Darko. "Projektiranje tokarilice za obradu drva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:929003

Tušek, Darko. "Projektiranje tokarilice za obradu drva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:929003

Tušek, D. (2019). 'Projektiranje tokarilice za obradu drva', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:929003

Tušek D. Projektiranje tokarilice za obradu drva [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:929003

D. Tušek, "Projektiranje tokarilice za obradu drva", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:929003

Metadata
TitleProjektiranje tokarilice za obradu drva
Title (english)Design of woodworking lathe
AuthorDarko Tušek
MentorDamir Ciglar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Drvo je relativno lako obradiv prirodni materijal niske gustoće, nešto slabijih mehaničkih svojstava i slabije toplinske provodnosti. Zbog toga se može reći da drvo kao tehnički materijal ima dušu. U ovom radu prikazat će se osnovna svojstva drva kao i njihov utjecaj na proces obrade odvajanjem čestica. Obradit će se ključni dijelovi teorije rezanja drva kako bi se lakše razumjela konstrukcija samog alatnog stroja, tj. tokarilice za obradu drva. U sklopu teorije rezanja prikazat će se specifičnosti obrade drva kao anizotropno-ortotropnog materijala. Dati će se uvid u rezne alate i konstrukcijske dijelove tokarilice. Cilj ovog rada je pojednostaviti konstrukciju tokarskog stroja, odnosno prilagoditi je za samogradnju, a da se ne naruši funkcionalnost i sigurnost stroja. U završnom djelu rada predstavljena je konstrukcija jedne takve modelarske tokarilice izrađena u programskom paketu SOLIDWORKS 2016. Konstrukcija je potkrijepljena proračunom osnovnih dijelova stroja. Prilikom konstruiranja posebna je pažnja posvećena jednostavnosti, upotrebi što više standardnih dijelova kao i korištenju jeftinijih i pristupačnijih tehnologija izrade dijelova.
Abstract (english)
Wood is relatively easy to process natural low density material, with somewhat weaker mechanical properties and lower thermal conductivity. Because of this it can be said that wood as tehnical material has a soul. In this bachelor thesis will be presented basic properties of wood, as well as theirs influence on the cutting process. Key parts of the wood cutting theory will be worked out in order to make it easier to understand the design of the machine tool itself, i.e. the woodworking lathe. In the cutting theory it will be shown some specificities of wood processing as an isotropic-orthotropic material. Insight will be given to the cutting tools and lathe anathomy. The purpose of this bachelor thesis is to simplify the design of a woodworking lathe so it can be built at home by hoby users, but not to undermine functionality and saefty of machine tool. In the final part of the work will be presented simplified design of a hoby woodworking lathe, designed in SOLIDWORKS 2016. Design is supported by the calculus of basic parts of the machine. In design process special attention was given to simplicity, using as maney standard parts and more affordable manufacturing technologies.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:929003
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-23 00:16:51