prikaz prve stranice dokumenta Modeliranje SCARA robota sa zatvorenim kinematskim lancem
  Download
PDF 30.69 MB
master's thesis
Modeliranje SCARA robota sa zatvorenim kinematskim lancem
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:941386
Martinić, Martin
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Martinić, M. (2022). Modeliranje SCARA robota sa zatvorenim kinematskim lancem (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:941386

Martinić, Martin. "Modeliranje SCARA robota sa zatvorenim kinematskim lancem." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:941386

Martinić, Martin. "Modeliranje SCARA robota sa zatvorenim kinematskim lancem." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:941386

Martinić, M. (2022). 'Modeliranje SCARA robota sa zatvorenim kinematskim lancem', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:941386

Martinić M. Modeliranje SCARA robota sa zatvorenim kinematskim lancem [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 May 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:941386

M. Martinić, "Modeliranje SCARA robota sa zatvorenim kinematskim lancem", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:941386

Metadata
TitleModeliranje SCARA robota sa zatvorenim kinematskim lancem
Title (english)Modelling SCARA robot with closed kinematic chain
AuthorMartin Martinić
MentorAndrej Jokić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-12-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovoga diplomskoga rada jest modelirati SCARA robot sa zatvorenim kinematskim lancem. Najprije je izrađen kinematski model robota pomoću matrice homogenih transformacija, a potom je, na temelju njega, izrađen aproksimirani dinamički model simuliran u Matlabu po x, y i z koordinatama s PID regulatorom. Nakon toga je u programskom alatu Solidworks izrađen 3D model SCARA robota. Potom je taj model uveden u Matlab pomoću alata Simscape te je generiran dinamički model unutar Matlabovog paketa Simulink. Model iz Simulinka nakon toga je uspoređen sa simulacijom dinamičkoga modela. Aproksimirana dinamika se pri jednostavnijim kretnjama poklapa s rezultatima simulacije iz Simscapea, dok pri kompleksnim pokretima dolazi do određene razlike, što je bilo očekivano s obzirom na složenost egzaktnog izračuna dinamike. Upravo je to razlogom da se – umjesto diferencijalnih proračuna dinamike – predlaže korištenje Simscapea.
Abstract (english)
The goal of this thesis is to model the SCARA robot with a closed kinematic chain. First, a kinematic model of the robot was created using a matrix of homogeneous transformations, and then based on it, an approximate dynamic model was created, simulated in Matlab by x, y and z coordinates with a PID controller. After that, a 3D model of the SCARA robot was created in the Solidworks software. The model was then imported into Matlab using the Simscape tool, and a dynamic model was generated within Matlab's Simulink package. After that, the model from Simulink was compared with the simulation of the dynamic model. The approximated dynamics for simpler movements coincides with the simulation results from Simscape, while for complex movements there is a significant difference, which was expected considering the complexity of the exact dynamics calculation. It is for this reason that it is suggested to use Simscape instead of differential dynamics calculations.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:941386
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-11-30 20:14:43