prikaz prve stranice dokumenta Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom
  Download
PDF 6.92 MB
master's thesis
Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:786510
Didak, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Didak, L. (2023). Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:786510

Didak, Luka. "Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:786510

Didak, Luka. "Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:786510

Didak, L. (2023). 'Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 01 January 2025, https://urn.nsk.hr/urn:nbn:hr:235:786510

Didak L. Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2025 January 01] Available at: https://urn.nsk.hr/urn:nbn:hr:235:786510

L. Didak, "Konstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:786510

Metadata
TitleKonstrukcija naprave za testiranje prigona za regulaciju sile kod brušenja robotom
Title (english)Design of a device for testing a force control drive for robot sanding
AuthorLuka Didak
MentorTomislav Staroveški (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-12-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog diplomskog rada je izraditi idejno konstrukcijsko rješenje naprave za testiranje različitih izvedbi prigona za regulaciju sile po kriteriju brzine odziva i točnosti regulacije sile u statičkim i dinamičkim uvjetima. Kako za ovakvu napravu ne postoje gotova rješenja na tržištu, nastojalo se, uzimajući u obzir ograničenja koja postavljaju uvjeti testiranja i robotska ćelija, razviti odgovarajuće rješenje za izradu takve naprave. U radu su predložena tri konceptualna rješenja, a nakon ocjene svakog od njih odabrano je ono s najvišom ocjenom prema kriterijima nosivosti, ukupne mase, cijene izrade, mogućnosti manipulacije i pozicioniranja unutar robotske ćelije. Odabrani koncept je detaljnije razrađen te su za njega izrađeni sklopni i radionički crteži. Razvijeni koncept rezultirao je vrlo fleksibilnim rješenjem primjenjivim u različitim konfiguracijama robotskih ćelija.
Abstract (english)
The goal of this thesis is to create a conceptual design of a device for testing different solutions of force control unit based on criteria of response speed and accuracy of force regulation in static and dynamic testing conditions. Since there are no ready-made solutions for this kind of device on the market, an effort was made, considering the limitations set by the testing conditions and the robotic cell, to develop an appropriate solution for making such a device. Three conceptual solutions were proposed in the paper and after evaluating each on of them, the one with the highest rating was selected based on the criteria of load capacity, total mass, manufacturing cost, manipulation, and positioning within the robotic cell. The selected concept was elaborated in more detail and assembly and workshop drawings were made for it. The developed concept resulted in a very flexible solution applicable in different configurations of robotic cells.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:786510
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-12-04 13:18:52