prikaz prve stranice dokumenta Structural Steel Joints with Bolts in Threaded Holes
  Download
PDF 1.98 MB
Scientific paper - Original scientific paper
Structural Steel Joints with Bolts in Threaded Holes
Tehnički vjesnik = Technical gazette, 24(4) (2022); 1382-1393. urn:nbn:hr:237:736936
Ptiček, Marko; Skejić, Davor; Veljković, Milan; Rizzano, Gianvittorio

Institutional repository: Repository of the Faculty of Civil Engineering, University of Zagreb

Cite this document

Ptiček, M., Skejić, D., Veljković, M. & Rizzano, G. (2022). Structural Steel Joints with Bolts in Threaded Holes. Tehnički vjesnik = Technical gazette, 24(4)., 1382-1393. Retrieved from https://urn.nsk.hr/urn:nbn:hr:237:736936

Ptiček, Marko, et al. "Structural Steel Joints with Bolts in Threaded Holes." Tehnički vjesnik = Technical gazette, vol. 24(4), 2022, pp. 1382-1393. https://urn.nsk.hr/urn:nbn:hr:237:736936

Ptiček, Marko, Davor Skejić, Milan Veljković and Gianvittorio Rizzano. "Structural Steel Joints with Bolts in Threaded Holes." Tehnički vjesnik = Technical gazette 24(4) (2022): 1382-1393. https://urn.nsk.hr/urn:nbn:hr:237:736936

Ptiček, M., et al. (2022) 'Structural Steel Joints with Bolts in Threaded Holes', Tehnički vjesnik = Technical gazette, 24(4), pp. 1382-1393. Available at: https://urn.nsk.hr/urn:nbn:hr:237:736936 (Accessed 20 October 2024)

Ptiček M, Skejić D, Veljković M, Rizzano G. Structural Steel Joints with Bolts in Threaded Holes. Tehnički vjesnik = Technical gazette [Internet]. 2022 [cited 2024 October 20];24(4):1382-1393. Available at: https://urn.nsk.hr/urn:nbn:hr:237:736936

M. Ptiček, D. Skejić, M. Veljković and G. Rizzano, "Structural Steel Joints with Bolts in Threaded Holes", Tehnički vjesnik = Technical gazette, vol. 24(4), pp. 1382-1393, 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:237:736936. [Accessed: 20 October 2024]

Metadata
Title (english)Structural Steel Joints with Bolts in Threaded Holes
AuthorMarko Ptiček
AuthorDavor Skejić
AuthorMilan Veljković
AuthorGianvittorio Rizzano
Author's institutionUniversity of Zagreb
Faculty of Civil Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Civil Engineering
Abstract (english)
The application of tubular columns in steel structures offers many advantages. However, this potential has not been fully utilized due to a lack of access for the installation of standard bolts in end-plate beam-to-column joints. Blind bolts are an alternative way of connecting the beam end-plate to hollow section column, for they can be installed and tightened from outside of the column. Standard high strength bolts can be directly screwed into the threaded hole tapped in the column hole wall. Bolts in threaded holes (BTH) - use threads on the bolt hole wall as an anchorage instead of nuts used in standard bolt assemblies. Provisions regarding BTH can be found in the draft version of new Eurocode 3, Part 1-8, including the definition of minimum thread engagement lengths. Parametric study of beam-to- tubular column joint with extended end-plate was conducted in order to analyse the influence of BTH and specific failure modes on overall joint resistance. Minimum thread engagement length limitations were checked for all considered combinations of parameters, and based on these results, an overview of the general applicability of bolts in threaded holes was gained.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleTehnički vjesnik = Technical gazette
Numberingvol. 24(4), pp. 1382-1393
e-ISSN1848-6339
URN:NBNurn:nbn:hr:237:736936
Publication2022
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-09-05 05:34:49