prikaz prve stranice dokumenta Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
  Download
PDF 441.6 KB
Scientific paper - Original scientific paper
Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
International Journal of Mechanical and Production Engineering, 7 (2019), 12; 120-122. urn:nbn:hr:115:072136
Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, Tin

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Slokar Benić, Lj., Rešković, S., Marciuš, M. & Brlić, T. (2019). Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation. International Journal of Mechanical and Production Engineering, 7. (12), 120-122. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Ljerka, et al. "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation." International Journal of Mechanical and Production Engineering, vol. 7, no. 12, 2019, pp. 120-122. https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Ljerka, Stoja Rešković, Marijan Marciuš and Tin Brlić. "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation." International Journal of Mechanical and Production Engineering 7, no. 12 (2019): 120-122. https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Lj., et al. (2019) 'Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation', International Journal of Mechanical and Production Engineering, 7(12), pp. 120-122. Available at: https://urn.nsk.hr/urn:nbn:hr:115:072136 (Accessed 20 May 2024)

Slokar Benić Lj, Rešković S, Marciuš M, Brlić T. Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation. International Journal of Mechanical and Production Engineering [Internet]. 2019 December [cited 2024 May 20];7(12):120-122. Available at: https://urn.nsk.hr/urn:nbn:hr:115:072136

Lj. Slokar Benić, S. Rešković, M. Marciuš and T. Brlić, "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation", International Journal of Mechanical and Production Engineering, vol. 7, no. 12, pp. 120-122, December 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:072136. [Accessed: 20 May 2024]

Metadata
Title (english)Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
AuthorLjerka Slokar Benić
AuthorStoja Rešković
AuthorMarijan Marciuš
AuthorTin Brlić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Microstructure has significant impact on the properties and behavior of materials, so it is a subject of intensive investigation nowdays. In this paper, special attention is paid to study on the beginning of the plastic material flow in Nb microalloyed steel during the cold deformation. Specific behavior of this steel can present a significant problem during the metalworking in terms of inhomogeneous deformations appearance. Due to many available methods now it is possible to observe what is happening during the deformation of certain material. Hence, investigation of material flow and stress distribution in deformation zone is growing up today. Therefore, the aim of this work was to establish the change of microstructure of low carbon steel microalloyed with niobium at start of the plastic flow during the cold deformation. For that purpose Nb microalloyed steel was hot rolled into strip and then static tensile test was carried out. Thermography method was used to study the changes of temperature during the deformation. Microstructure before and after deformation was observed by scanning electron microscope. These investigations showed the fine grained ferrite -pearlitic microstructure and its significant changes at start of the plastic flow during the cold deformation
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleInternational Journal of Mechanical and Production Engineering
Numberingvol. 7, no. 12, pp. 120-122
p-ISSN2320-2092
e-ISSN2321-2071
URN:NBNurn:nbn:hr:115:072136
Publication2019-12
ProjectNumber: IP-2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: Stoja Rešković
Jurisdiction: Croatia
Funding stream: IP
Document URLhttp://iraj.in/journal/IJMPE/volume.php?volume_id=621
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-25 10:07:15