prikaz prve stranice dokumenta Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
  Preuzmi
PDF 441.6 KB
Znanstveni rad - Izvorni znanstveni rad
Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
International Journal of Mechanical and Production Engineering, 7 (2019), 12; 120-122. urn:nbn:hr:115:072136
Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, Tin

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Slokar Benić, Lj., Rešković, S., Marciuš, M. i Brlić, T. (2019). Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation. International Journal of Mechanical and Production Engineering, 7. (12), 120-122. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Ljerka, et al. "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation." International Journal of Mechanical and Production Engineering, vol. 7, br. 12, 2019, str. 120-122. https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Ljerka, Stoja Rešković, Marijan Marciuš i Tin Brlić. "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation." International Journal of Mechanical and Production Engineering 7, br. 12 (2019): 120-122. https://urn.nsk.hr/urn:nbn:hr:115:072136

Slokar Benić, Lj., et al. (2019) 'Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation', International Journal of Mechanical and Production Engineering, 7(12), str. 120-122. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:072136 (Datum pristupa: 01.12.2024.)

Slokar Benić Lj, Rešković S, Marciuš M, Brlić T. Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation. International Journal of Mechanical and Production Engineering [Internet]. 12.2019. [pristupljeno 01.12.2024.];7(12):120-122. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:072136

Lj. Slokar Benić, S. Rešković, M. Marciuš i T. Brlić, "Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation", International Journal of Mechanical and Production Engineering, vol. 7, br. 12, str. 120-122, Prosinac 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:072136. [Citirano: 01.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:072136
Podaci o radu
Naslov (engleski)Change of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation
AutorLjerka Slokar Benić
AutorStoja Rešković
AutorMarijan Marciuš
AutorTin Brlić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Microstructure has significant impact on the properties and behavior of materials, so it is a subject of intensive investigation nowdays. In this paper, special attention is paid to study on the beginning of the plastic material flow in Nb microalloyed steel during the cold deformation. Specific behavior of this steel can present a significant problem during the metalworking in terms of inhomogeneous deformations appearance. Due to many available methods now it is possible to observe what is happening during the deformation of certain material. Hence, investigation of material flow and stress distribution in deformation zone is growing up today. Therefore, the aim of this work was to establish the change of microstructure of low carbon steel microalloyed with niobium at start of the plastic flow during the cold deformation. For that purpose Nb microalloyed steel was hot rolled into strip and then static tensile test was carried out. Thermography method was used to study the changes of temperature during the deformation. Microstructure before and after deformation was observed by scanning electron microscope. These investigations showed the fine grained ferrite -pearlitic microstructure and its significant changes at start of the plastic flow during the cold deformation
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaInternational Journal of Mechanical and Production Engineering
Brojčani podacivol. 7, br. 12, str. 120-122
p-ISSN2320-2092
e-ISSN2321-2071
URN:NBNurn:nbn:hr:115:072136
Datum objave publikacije2019-12
ProjektŠifra: IP-2016-06-1270
Naziv (hrvatski): Istraživanja početka plastičnog toka metala kod hladne deformacije
Kratica: MFSRIP062016
Voditelj: Stoja Rešković
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
URL dokumentahttp://iraj.in/journal/IJMPE/volume.php?volume_id=621
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2020-02-25 10:07:15