prikaz prve stranice dokumenta The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
  Download
PDF 6.52 MB
Scientific paper - Original scientific paper
The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
Journal of mining and metallurgy, Section B, Metallurgy, 56 (2022), 3; 425-433. urn:nbn:hr:115:635166
Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja; Penko, Andrej

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Kozina, F., Zovko Brodarac, Z., Petrič, M. & Penko, A. (2022). The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy. Journal of mining and metallurgy, Section B, Metallurgy, 56. (3), 425-433. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, Franjo, et al. "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy." Journal of mining and metallurgy, Section B, Metallurgy, vol. 56, no. 3, 2022, pp. 425-433. https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, Franjo, Zdenka Zovko Brodarac, Mitja Petrič and Andrej Penko. "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy." Journal of mining and metallurgy, Section B, Metallurgy 56, no. 3 (2022): 425-433. https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, F., et al. (2022) 'The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy', Journal of mining and metallurgy, Section B, Metallurgy, 56(3), pp. 425-433. Available at: https://urn.nsk.hr/urn:nbn:hr:115:635166 (Accessed 05 November 2024)

Kozina F, Zovko Brodarac Z, Petrič M, Penko A. The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy. Journal of mining and metallurgy, Section B, Metallurgy [Internet]. 2022 [cited 2024 November 05];56(3):425-433. Available at: https://urn.nsk.hr/urn:nbn:hr:115:635166

F. Kozina, Z. Zovko Brodarac, M. Petrič and A. Penko, "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy", Journal of mining and metallurgy, Section B, Metallurgy, vol. 56, no. 3, pp. 425-433, 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:635166. [Accessed: 05 November 2024]

Metadata
Title (english)The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
AuthorFranjo Kozina
AuthorZdenka Zovko Brodarac
AuthorMitja Petrič
AuthorAndrej Penko
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Process Metallurgy)
(Laboratory of Iron, Steel and Founding)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Process Metallurgy
Abstract (english)
As a major impurity element in aluminium-lithium (Al-Li) alloys, iron (Fe) reduces formability, fracture toughness, and fatigue resistance by solidifying into Al6Fe and Al3Fe particles. The research was performed in order to estimate the influence of Fe impurities on the compression behaviour of Al-2.24Mg-2.09Li alloy. The investigation was performed on the samples in as cast and solution hardened condition. The solution hardening was applied to improve the mechanical properties by dissolving intermetallic particles and enriching αAl matrix with Mg. However, the higher strength properties and temperature increase during the compression testing were observed in as cast condition. Microstructural investigation revealed significant differences in microstructure changes between the samples in as cast and solution hardened condition. In as cast sample the barrelling effect led to the unequal deformation and surface texture development. The eutectic Al3Fe particles located in the αAl interdendritic areas did not significantly impact microstructure changes. Although the solution hardening led to enrichment of αAl matrix with Mg and Fe, the Al3Fe particles were not dissolved. The coarse morphology of Al3Fe particles and location at the grain boundaries of αAl grains contributed to low energy intergranular fracture. The fracture nucleation and propagation across the grain boundaries resulted in lower strength values.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleJournal of mining and metallurgy, Section B, Metallurgy
Numberingvol. 56, no. 3, pp. 425-433
p-ISSN1450-5339
e-ISSN2217-7175
URN:NBNurn:nbn:hr:115:635166
Publication2022
Document URLchrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://jmmab.com/wp-content/uploads/2020/12/1450-53392000038K-a5b.pdf
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-26 11:22:07