prikaz prve stranice dokumenta The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
  Preuzmi
PDF 6.52 MB
Znanstveni rad - Izvorni znanstveni rad
The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
Journal of mining and metallurgy, Section B, Metallurgy, 56 (2022), 3; 425-433. urn:nbn:hr:115:635166
Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja; Penko, Andrej

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Kozina, F., Zovko Brodarac, Z., Petrič, M. i Penko, A. (2022). The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy. Journal of mining and metallurgy, Section B, Metallurgy, 56. (3), 425-433. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, Franjo, et al. "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy." Journal of mining and metallurgy, Section B, Metallurgy, vol. 56, br. 3, 2022, str. 425-433. https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, Franjo, Zdenka Zovko Brodarac, Mitja Petrič i Andrej Penko. "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy." Journal of mining and metallurgy, Section B, Metallurgy 56, br. 3 (2022): 425-433. https://urn.nsk.hr/urn:nbn:hr:115:635166

Kozina, F., et al. (2022) 'The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy', Journal of mining and metallurgy, Section B, Metallurgy, 56(3), str. 425-433. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:635166 (Datum pristupa: 05.11.2024.)

Kozina F, Zovko Brodarac Z, Petrič M, Penko A. The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy. Journal of mining and metallurgy, Section B, Metallurgy [Internet]. 2022. [pristupljeno 05.11.2024.];56(3):425-433. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:635166

F. Kozina, Z. Zovko Brodarac, M. Petrič i A. Penko, "The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy", Journal of mining and metallurgy, Section B, Metallurgy, vol. 56, br. 3, str. 425-433, 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:635166. [Citirano: 05.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:635166
Podaci o radu
Naslov (engleski)The influence of iron impurities on the compression behavior of Al-2.24Mg-2.09Li alloy
AutorFranjo Kozina
AutorZdenka Zovko Brodarac
AutorMitja Petrič
AutorAndrej Penko
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za procesnu metalurgiju)
(Laboratorij za željezo, čelik i ljevarstvo)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Procesna metalurgija
Sažetak (engleski)
As a major impurity element in aluminium-lithium (Al-Li) alloys, iron (Fe) reduces formability, fracture toughness, and fatigue resistance by solidifying into Al6Fe and Al3Fe particles. The research was performed in order to estimate the influence of Fe impurities on the compression behaviour of Al-2.24Mg-2.09Li alloy. The investigation was performed on the samples in as cast and solution hardened condition. The solution hardening was applied to improve the mechanical properties by dissolving intermetallic particles and enriching αAl matrix with Mg. However, the higher strength properties and temperature increase during the compression testing were observed in as cast condition. Microstructural investigation revealed significant differences in microstructure changes between the samples in as cast and solution hardened condition. In as cast sample the barrelling effect led to the unequal deformation and surface texture development. The eutectic Al3Fe particles located in the αAl interdendritic areas did not significantly impact microstructure changes. Although the solution hardening led to enrichment of αAl matrix with Mg and Fe, the Al3Fe particles were not dissolved. The coarse morphology of Al3Fe particles and location at the grain boundaries of αAl grains contributed to low energy intergranular fracture. The fracture nucleation and propagation across the grain boundaries resulted in lower strength values.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaJournal of mining and metallurgy, Section B, Metallurgy
Brojčani podacivol. 56, br. 3, str. 425-433
p-ISSN1450-5339
e-ISSN2217-7175
URN:NBNurn:nbn:hr:115:635166
Datum objave publikacije2022
URL dokumentachrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://jmmab.com/wp-content/uploads/2020/12/1450-53392000038K-a5b.pdf
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-26 11:22:07