prikaz prve stranice dokumenta Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
No public access
Scientific paper - Chapter in Book
Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
In: Light Metals 2019 / Chesonis, Corleen (Ed.). Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019. pp. 199-207. https://doi.org/10.1007/978-3-030-05864-7_27
Stanić, Davor; Zovko Brodarac, Zdenka; Li, Letian

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Stanić, D., Zovko Brodarac, Z. & Li, L. (2019). Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy. In C. Chesonis, (Ed.), Light Metals 2019 (pp. 199-207). Cham, Switzerland: The Minerals, Metals & Materials Society 2019. doi: 10.1007/978-3-030-05864-7_27

Stanić, Davor, et al. "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy." Light Metals 2019, edited by Corleen Chesonis, The Minerals, Metals & Materials Society 2019, 2019, pp. 199-207. https://urn.nsk.hr/urn:nbn:hr:115:711820

Stanić, Davor, Zdenka Zovko Brodarac and Letian Li. "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy." In Light Metals 2019, edited by Corleen Chesonis, 199-207. Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019. https://urn.nsk.hr/urn:nbn:hr:115:711820

Stanić, D., Zovko Brodarac, Z. and Li, L. (2019) 'Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy' in Chesonis, C. (ed.) Light Metals 2019 Cham, Switzerland: The Minerals, Metals & Materials Society 2019, pp. 199-207. Available at: https://urn.nsk.hr/urn:nbn:hr:115:711820 (Accessed 17 June 2024)

Stanić D, Zovko Brodarac Z, Li L. Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy. In: C. Chesonis, ed. Light Metals 2019. Cham, Switzerland: The Minerals, Metals & Materials Society 2019; 2019. Pp. 199-207. [cited 2024 June 17] Available at: https://urn.nsk.hr/urn:nbn:hr:115:711820

D. Stanić, Z. Zovko Brodarac and L. Li, "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy", Light Metals 2019, C. Chesonis, Ed. Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019, pp. 199-207. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:711820

Metadata
Title (english)Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
AuthorDavor Stanić
AuthorZdenka Zovko Brodarac
AuthorLetian Li
EditorCorleen Chesonis
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Process Metallurgy)
(Laboratory of Iron, Steel and Founding)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
The design of materials through the selection of the chemical composition, thermodynamic modelling, melt treatment, correctly developed casting technology followed by adequate heat treatment could improve casting properties. A wide range of complex reactions and intermetallic phases occurs due to numerous alloying (Si, Mg, Cu) and trace elements (Fe, Mn) interaction. Determination of solidification sequence was performed by modeling of equilibrium phase diagram, simultaneous thermal analysis and metallographic investigations. Microstructure revealed needle-like Al5SiFe and Chinese script phase Al15(Fe,Mn,Cu)3Si2 enriched in copper. Copper addition resulted in formation of compact complex intermetallic phases Al5Cu2Mg8Si6 and Al8FeMg3Si6. Solidification ended with secondary eutectic phases Mg2Si and Al2Cu. Wide spectra of favourable intermetallic phases comprehend to the tensile mechanical properties development already in as-cast state. Comparison of yield and tensile strength with commonly used AlSi7Mg alloy indicates significant increase of investigated properties for innovative chemistry of AlSi7Mg(Cu) alloy in as-cast state
Keywords (english)
Languageenglish
Publication typeScientific paper - Chapter in Book
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Book titleLight Metals 2019
Series titleLight Metals
Numberingpp. 199-207
ISBN978-3-030-05863-0
p-ISSN2367-1181
e-ISSN2367-1696
DOIhttps://doi.org/10.1007/978-3-030-05864-7_27
URN:NBNurn:nbn:hr:115:711820
Publication2019
ProjectNumber: KK.01.1.1.02.0020
Title (croatian): Centar za ljevarstvo - SIMET
Title (english): Center for casting - SIMET
Acronym: SIMET
Leader: Zdenka Zovko Brodarac
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ProjectNumber: KK.01.1.1.02.0022
Title (croatian): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Acronym: Virtulab
Leader: Sibila Borojević Šoštarić
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
Document URLhttps://link.springer.com/chapter/10.1007/978-3-030-05864-7_27#citeas
Type of resourceText
PublisherThe Minerals, Metals & Materials Society 2019
Publishing placeCham, Switzerland
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-04-29 11:35:59