prikaz prve stranice dokumenta Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
Rad nije dostupan
Znanstveni rad - Poglavlje u knjizi
Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
U: Light Metals 2019 / Chesonis, Corleen (ur.). Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019. str. 199-207. https://doi.org/10.1007/978-3-030-05864-7_27
Stanić, Davor; Zovko Brodarac, Zdenka; Li, Letian

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Stanić, D., Zovko Brodarac, Z. i Li, L. (2019). Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy. U C. Chesonis, (Ur.), Light Metals 2019 (str. 199-207). Cham, Switzerland: The Minerals, Metals & Materials Society 2019. doi: 10.1007/978-3-030-05864-7_27

Stanić, Davor, et al. "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy." Light Metals 2019, Ur. Corleen Chesonis, The Minerals, Metals & Materials Society 2019, 2019, str. 199-207. https://urn.nsk.hr/urn:nbn:hr:115:711820

Stanić, Davor, Zdenka Zovko Brodarac i Letian Li. "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy." U Light Metals 2019, ur. Corleen Chesonis, 199-207. Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019. https://urn.nsk.hr/urn:nbn:hr:115:711820

Stanić, D., Zovko Brodarac, Z. i Li, L. (2019) 'Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy' u Chesonis, C. (ur.) Light Metals 2019 Cham, Switzerland: The Minerals, Metals & Materials Society 2019, str. 199-207. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:711820 (Datum pristupa: 05.06.2024.)

Stanić D, Zovko Brodarac Z, Li L. Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy. U: C. Chesonis, ur. Light Metals 2019. Cham, Switzerland: The Minerals, Metals & Materials Society 2019; 2019. Str. 199-207. [pristupljeno 05.06.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:711820

D. Stanić, Z. Zovko Brodarac i L. Li, "Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy", Light Metals 2019, C. Chesonis, Ur. Cham, Switzerland: The Minerals, Metals & Materials Society 2019, 2019, str. 199-207. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:711820

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:711820
Podaci o radu
Naslov (engleski)Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy
AutorDavor Stanić
AutorZdenka Zovko Brodarac
AutorLetian Li
UrednikCorleen Chesonis
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za procesnu metalurgiju)
(Laboratorij za željezo, čelik i ljevarstvo)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
The design of materials through the selection of the chemical composition, thermodynamic modelling, melt treatment, correctly developed casting technology followed by adequate heat treatment could improve casting properties. A wide range of complex reactions and intermetallic phases occurs due to numerous alloying (Si, Mg, Cu) and trace elements (Fe, Mn) interaction. Determination of solidification sequence was performed by modeling of equilibrium phase diagram, simultaneous thermal analysis and metallographic investigations. Microstructure revealed needle-like Al5SiFe and Chinese script phase Al15(Fe,Mn,Cu)3Si2 enriched in copper. Copper addition resulted in formation of compact complex intermetallic phases Al5Cu2Mg8Si6 and Al8FeMg3Si6. Solidification ended with secondary eutectic phases Mg2Si and Al2Cu. Wide spectra of favourable intermetallic phases comprehend to the tensile mechanical properties development already in as-cast state. Comparison of yield and tensile strength with commonly used AlSi7Mg alloy indicates significant increase of investigated properties for innovative chemistry of AlSi7Mg(Cu) alloy in as-cast state
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Poglavlje u knjizi
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov knjigeLight Metals 2019
Naslov serijeLight Metals
Brojčani podacistr. 199-207
ISBN978-3-030-05863-0
p-ISSN2367-1181
e-ISSN2367-1696
DOIhttps://doi.org/10.1007/978-3-030-05864-7_27
URN:NBNurn:nbn:hr:115:711820
Datum objave publikacije2019
ProjektŠifra: KK.01.1.1.02.0020
Naziv (hrvatski): Centar za ljevarstvo - SIMET
Naziv (engleski): Center for casting - SIMET
Kratica: SIMET
Voditelj: Zdenka Zovko Brodarac
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
ProjektŠifra: KK.01.1.1.02.0022
Naziv (hrvatski): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Kratica: Virtulab
Voditelj: Sibila Borojević Šoštarić
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
URL dokumentahttps://link.springer.com/chapter/10.1007/978-3-030-05864-7_27#citeas
Vrsta resursaTekst
IzdavačThe Minerals, Metals & Materials Society 2019
Mjesto izdavanjaCham, Switzerland
Prava pristupaZatvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-29 11:35:59