prikaz prve stranice dokumenta Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior
  Preuzmi
PDF 3.04 MB
Znanstveni rad - Izvorni znanstveni rad
Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior
Symmetry, 13 (2021), 2; 1-20. https://doi.org/10.3390/sym13020293
Ćurković, Petar

Institucijski repozitorij: Repozitorij Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu

Citirajte ovaj rad

Ćurković, P. (2021). Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior. Symmetry, 13. (2), 1-20. doi: 10.3390/sym13020293

Ćurković, Petar. "Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior." Symmetry, vol. 13, br. 2, 2021, str. 1-20. https://doi.org/10.3390/sym13020293

Ćurković, Petar. "Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior." Symmetry 13, br. 2 (2021): 1-20. https://doi.org/10.3390/sym13020293

Ćurković, P. (2021) 'Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior', Symmetry, 13(2), str. 1-20. doi: 10.3390/sym13020293

Ćurković P. Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior. Symmetry [Internet]. 09.02.2021. [pristupljeno 11.03.2025.];13(2):1-20. doi: 10.3390/sym13020293

P. Ćurković, "Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior", Symmetry, vol. 13, br. 2, str. 1-20, Veljača 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:235:822728. [Citirano: 11.03.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:235:822728
Podaci o radu
Naslov (engleski)Optimization of Generatively Encoded Multi-Material Lattice Structures for Desired Deformation Behavior
AutorPetar Ćurković
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Strojarstvo
Proizvodno strojarstvo
Sažetak (engleski)
Natural systems achieve favorable mechanical properties through coupling significantly different elastic moduli within a single tissue. However, when it comes to man-made materials and structures, there are a lack of methods which enable production of artifacts inspired by these phenomena. In this study, a method for design automation based on alternate deposition of soft and stiff struts within a multi-material 3D lattice structure with desired deformation behavior is proposed. These structures, once external forces are applied, conform to the geometry given in advance. For that purpose, a population-based algorithm was proposed and integrated with a multi-material physics simulator. To reduce the amount of data processed during optimization, a generative encoding method based on discrete cosine transform (DCT) was proposed. This enabled a compressed topological description and promoted symmetry in material distribution. The simulation results showed different three-dimensional lattice structures designed with proposed algorithm to meet a set of desired deformation behaviors. The relation between residual deformation error, targeted deformation geometry, and material distribution is discussed.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaSymmetry
Brojčani podacivol. 13, br. 2, str. 1-20
p-ISSN2073-8994
DOIhttps://doi.org/10.3390/sym13020293
URN:NBNurn:nbn:hr:235:822728
Datum objave publikacije2021-02-09
URL dokumentahttps://www.mdpi.com/2073-8994/13/2/293
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-07-16 07:44:25