prikaz prve stranice dokumenta Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics
  Preuzmi
PDF 7.69 MB
Znanstveni rad - Izvorni znanstveni rad
Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics
Transactions of FAMENA, 48 (2024), 3; 21-35. https://doi.org/10.21278/TOF.483057923
Haramina, Krunoslav; Kranjčević, Nenad; Hoić, Matija; Deur, Joško; Tissot, Andreas

Institucijski repozitorij: Repozitorij Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu

Citirajte ovaj rad

Haramina, K., Kranjčević, N., Hoić, M., Deur, J. i Tissot, A. (2024). Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics. Transactions of FAMENA, 48. (3), 21-35. doi: 10.21278/TOF.483057923

Haramina, Krunoslav, et al. "Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics." Transactions of FAMENA, vol. 48, br. 3, 2024, str. 21-35. https://doi.org/10.21278/TOF.483057923

Haramina, Krunoslav, Nenad Kranjčević, Matija Hoić, Joško Deur i Andreas Tissot. "Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics." Transactions of FAMENA 48, br. 3 (2024): 21-35. https://doi.org/10.21278/TOF.483057923

Haramina, K., et al. (2024) 'Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics', Transactions of FAMENA, 48(3), str. 21-35. doi: 10.21278/TOF.483057923

Haramina K, Kranjčević N, Hoić M, Deur J, Tissot A. Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics. Transactions of FAMENA [Internet]. 19.06.2024. [pristupljeno 25.11.2024.];48(3):21-35. doi: 10.21278/TOF.483057923

K. Haramina, N. Kranjčević, M. Hoić, J. Deur i A. Tissot, "Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics", Transactions of FAMENA, vol. 48, br. 3, str. 21-35, Lipanj 2024. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:235:309588. [Citirano: 25.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:235:309588
Podaci o radu
Naslov (engleski)Modelling of E-Clutch Axial Dynamics Based on Experimentally Identified Clutch Component Stress-Strain Characteristics
AutorKrunoslav Haramina
AutorNenad Kranjčević
AutorMatija Hoić
AutorJoško Deur
AutorAndreas Tissot
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
(Zavod za robotiku i automatizaciju proizvodnih sustava)
(Katedra za strojarsku automatiku)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Strojarstvo
Sažetak (engleski)
E-clutch systems allow for a conventional or electrified powertrain control system to operate the transmission clutch for expanded functionalities, reduced fuel consumption, and improved driving comfort. To facilitate E-clutch control system design and enable its simulation verification, an accurate E-clutch model is required. The paper presents a lumped-parameter model of E-clutch axial dynamics parameterized based on experimentally identified stress-strain characteristics of individual components of a disassembled clutch. An initial, simplified model is first presented and parameterized based on the overall, input-output stress-strain characteristics identified. While the experimental validation results show that the initial model provides a satisfactory prediction of the clutch torque static curve, the prediction of the release bearing force static curve is less satisfactory, thus indicating a potential for further model improvements. Therefore, new, more detailed versions of the model containing individual component stress-strain characteristics are proposed and experimentally validated. The validation results indicate considerable improvements in the normal force static curve prediction accuracy when using the extended model.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaTransactions of FAMENA
Brojčani podacivol. 48, br. 3, str. 21-35
p-ISSN1333-1124
e-ISSN1849-1391
DOIhttps://doi.org/10.21278/TOF.483057923
URN:NBNurn:nbn:hr:235:309588
Datum objave publikacije2024-06-19
URL dokumentahttps://hrcak.srce.hr/en/clanak/459761
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-07-17 09:20:20