prikaz prve stranice dokumenta Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy
  Preuzmi
PDF 44.29 MB
Znanstveni rad - Izvorni znanstveni rad
Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy
Sustainability, 13(16) (2021); 9330. https://doi.org/10.3390/su13169330
Bubalo, Anđelina; Vouk, Dražen; Nina, Štirmer; Nađ, Karlo

Institucijski repozitorij: Repozitorij Građevinskog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Bubalo, A., Vouk, D., Nina, Š. i Nađ, K. (2021). Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy. Sustainability, 13(16).. doi: 10.3390/su13169330

Bubalo, Anđelina, et al. "Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy." Sustainability, vol. 13(16), 2021. https://doi.org/10.3390/su13169330

Bubalo, Anđelina, Dražen Vouk, Štirmer Nina i Karlo Nađ. "Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy." Sustainability 13(16) (2021). https://doi.org/10.3390/su13169330

Bubalo, A., et al. (2021) 'Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy', Sustainability, 13(16). doi: 10.3390/su13169330

Bubalo A, Vouk D, Nina Š, Nađ K. Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy. Sustainability [Internet]. 2021. [pristupljeno 24.11.2024.];13(16). doi: 10.3390/su13169330

A. Bubalo, D. Vouk, Š. Nina i K. Nađ, "Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy", Sustainability, vol. 13(16), 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:173943. [Citirano: 24.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:237:173943
Podaci o radu
Naslov (engleski)Use of Sewage Sludge Ash in the Production of Innovative Bricks-An Example of a Circular Economy
AutorAnđelina Bubalo
AutorDražen Vouk
AutorŠtirmer Nina
AutorKarlo Nađ
Autorova ustanovaSveučilište u Zagrebu
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
In this paper the properties of clay bricks with 5 wt%, 10 wt%, and 20 wt% sewage sludge ash (SSA) were studied and compared with the properties of control bricks made of 100% clay. Sewage sludge (SS) was collected at two wastewater treatment plants (WWTPs) in Croatia— WWTP Zagreb and WWTP Karlovac—and incinerated at a temperature of 900 °C The bricks were produced on a laboratory scale. A total of seven types of bricks were produced— control bricks and six types of bricks as combinations of different wt% of SSA generated from SS that was collected at two different WWTPs. The physical and mechanical properties of produced bricks were tested. Compressive strengths of bricks with 5 wt% SSA (54.0–54.5 N/mm2) and 10 wt% SSA (50.2–51.0 N/mm2) were higher compared to the control bricks (50.4 N/mm2), while bricks with 20 wt% SSA (37.0–43.9) N/mm2) had noticeably lower compressive strenght. The coefficient of saturation was lower for bricks with SSA compared to control bricks. The initial absorption values were more pronounced for SSA fractions of 20 wt%.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaSustainability
Brojčani podacivol. 13(16), 9330
e-ISSN2071-1050
DOIhttps://doi.org/10.3390/su13169330
URN:NBNurn:nbn:hr:237:173943
Datum objave publikacije2021
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-09-04 10:37:20