prikaz prve stranice dokumenta Revealing corrosion parameters of steel in alkali-activated materials
  Preuzmi
PDF 4.38 MB
Znanstveni rad - Izvorni znanstveni rad
Revealing corrosion parameters of steel in alkali-activated materials
Corrosion science, 210(2) (2023); 110849. urn:nbn:hr:237:468471
Runci, Antonino; Provis, John; Serdar, Marijana

Institucijski repozitorij: Repozitorij Građevinskog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Runci, A., Provis, J. i Serdar, M. (2023). Revealing corrosion parameters of steel in alkali-activated materials. Corrosion science, 210(2).. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:237:468471

Runci, Antonino, et al. "Revealing corrosion parameters of steel in alkali-activated materials." Corrosion science, vol. 210(2), 2023. https://urn.nsk.hr/urn:nbn:hr:237:468471

Runci, Antonino, John Provis i Marijana Serdar. "Revealing corrosion parameters of steel in alkali-activated materials." Corrosion science 210(2) (2023). https://urn.nsk.hr/urn:nbn:hr:237:468471

Runci, A., Provis, J. i Serdar, M. (2023) 'Revealing corrosion parameters of steel in alkali-activated materials', Corrosion science, 210(2). Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:237:468471 (Datum pristupa: 23.11.2024.)

Runci A, Provis J, Serdar M. Revealing corrosion parameters of steel in alkali-activated materials. Corrosion science [Internet]. 2023. [pristupljeno 23.11.2024.];210(2). Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:468471

A. Runci, J. Provis i M. Serdar, "Revealing corrosion parameters of steel in alkali-activated materials", Corrosion science, vol. 210(2), 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:237:468471. [Citirano: 23.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:237:468471
Podaci o radu
Naslov (engleski)Revealing corrosion parameters of steel in alkali-activated materials
AutorAntonino Runci
AutorJohn Provis
AutorMarijana Serdar
Autorova ustanovaSveučilište u Zagrebu
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
The long-term corrosion behaviour of reinforcing steel embedded in alkali-activated mortars (AAMs) prepared with three different binder compositions was monitored over a 360-day period by cyclic wetting/drying and spraying with chloride solution. Corrosion potential and polarisation resistance were determined by linear polarisation, individual resistance of mortar and steel by electrochemical impedance spectroscopy, and Tafel slopes by potentiodynamic anodic polarisation. The results were validated by correlating the electrochemical mass losses with the gravimetric mass losses. Based on the time evolution of the corrosion parameters, the study proposes new limits for passive and active corrosion conditions for reinforcing steel in AAMs.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaCorrosion science
Brojčani podacivol. 210(2), 110849
e-ISSN1879-0496
URN:NBNurn:nbn:hr:237:468471
Datum objave publikacije2023
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-09-05 05:46:36