prikaz prve stranice dokumenta Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation
  Preuzmi
PDF 4.85 MB
Znanstveni rad - Izvorni znanstveni rad
Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation
International Journal for Numerical Methods in Engineering, 124 (2023), 8; 1773-1797. https://doi.org/10.1002/nme.7187
Ranjbar, Maedeh; Škec, Leo; Jelenić, Gordan; Ribarić, Dragan

Institucijski repozitorij: Repozitorij Građevinskog fakulteta Rijeka

Citirajte ovaj rad

Ranjbar, M., Škec, L., Jelenić, G. i Ribarić, D. (2023). Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation. International Journal for Numerical Methods in Engineering, 124. (8), 1773-1797. doi: 10.1002/nme.7187

Ranjbar, Maedeh, et al. "Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation." International Journal for Numerical Methods in Engineering, vol. 124, br. 8, 2023, str. 1773-1797. https://doi.org/10.1002/nme.7187

Ranjbar, Maedeh, Leo Škec, Gordan Jelenić i Dragan Ribarić. "Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation." International Journal for Numerical Methods in Engineering 124, br. 8 (2023): 1773-1797. https://doi.org/10.1002/nme.7187

Ranjbar, M., et al. (2023) 'Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation', International Journal for Numerical Methods in Engineering, 124(8), str. 1773-1797. doi: 10.1002/nme.7187

Ranjbar M, Škec L, Jelenić G, Ribarić D. Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation. International Journal for Numerical Methods in Engineering [Internet]. 30.04.2023. [pristupljeno 24.11.2024.];124(8):1773-1797. doi: 10.1002/nme.7187

M. Ranjbar, L. Škec, G. Jelenić i D. Ribarić, "Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation", International Journal for Numerical Methods in Engineering, vol. 124, br. 8, str. 1773-1797, Travanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:157:207585. [Citirano: 24.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:157:207585
Podaci o radu
Naslov (engleski)Mixed‐mode delamination of layered structures modeled as Timoshenko beams with linked interpolation
AutorMaedeh Ranjbar
AutorLeo Škec
AutorGordan Jelenić
AutorDragan Ribarić
MBZ: 344636
Autorova ustanovaSveučilište u Rijeci
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Temeljne tehničke znanosti
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Temeljne tehničke znanosti
Sažetak (engleski)
In this work, a finite-element formulation for modeling mixed-mode delamination in layered structures, consisting of two-node Timoshenko beam finite elements with quadratic linked interpolation and corresponding 4-node interface elements is presented and compared to a more common approach where linear Lagrange interpolation is used. The principal novelty of the proposed approach is that the vertical displacements of the beam elements, as well as the transversal relative displacements of the interface elements, are interpolated using a quadratic linked interpolation that also takes into account the nodal cross-sectional rotations of the beam elements. At the same time, the axial displacements and cross-sectional rotations are interpolated using linear Lagrange polynomials. A bilinear cohesive zone model is embedded in the interface finite elements for delamination modes I and II. Numerical analyses based on the examples from the literature with metal joints show that the formulation with quadratic linked interpolation improves the convergence and robustness of the solution with respect to the approach with linear interpolation. On the other hand, in case of composites with stiff adhesives this formulation exhibits a peculiar behavior with spurious oscillations of the normal interface tractions that leads to a poor performance in mode-I and mixed-mode tests. This problem can be easily solved by canceling the quadratic term in the interpolation function and using the standard Lagrange interpolation in such cases.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaInternational Journal for Numerical Methods in Engineering
Brojčani podacivol. 124, br. 8, str. 1773-1797
p-ISSN0029-5981
e-ISSN1097-0207
DOIhttps://doi.org/10.1002/nme.7187
URN:NBNurn:nbn:hr:157:207585
Datum objave elektroničkog izdanja2022-12-08
Datum objave publikacije2023-04-30
ProjektŠifra: IP-2016-06-4775
Naziv (hrvatski): Metoda usvojenih deformacija za konačne elemente slojevitih ploča i ljuski i njena primjena na probleme delaminacije
Naziv (engleski): Assumed strain method in finite elements for layered plates and shells with application on layer delamination problem
Kratica: ASDEL
Voditelj: Dragan Ribarić
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
ProjektŠifra: IP-2018-01-1732
Naziv (hrvatski): Koncept nepomičnog pola u numeričkom modeliranju Cosseratovog kontinuuma
Kratica: FIMCOS
Voditelj: Gordan Jelenić
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
ProjektŠifra: 860124
Naziv (engleski): Joint Training on Numerical Modelling of Highly Flexible Structures for Industrial Applications
Kratica: THREAD
Voditelj: Gordan Jelenić
Pravna nadležnost: eu
Financijer: EC
Linija financiranja: Horizon 2020
URL dokumentahttps://onlinelibrary.wiley.com/doi/10.1002/nme.7187
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje-Nekomercijalno-Bez prerada 4.0 međunarodna (CC BY-NC-ND 4.0)
Datum i vrijeme pohrane2022-12-16 07:59:42