prikaz prve stranice dokumenta Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes
  Preuzmi
PDF 11.57 MB
Znanstveni rad - Izvorni znanstveni rad
Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes
Buildings, 12 (2022), 5; 681. https://doi.org/10.3390/buildings12050681
Buljan, Nebojša; Skejić, Davor; Krolo, Paulina; Lukić, Mladen

Institucijski repozitorij: Repozitorij Građevinskog fakulteta Rijeka

Citirajte ovaj rad

Buljan, N., Skejić, D., Krolo, P. i Lukić, M. (2022). Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes. Buildings, 12. (5). doi: 10.3390/buildings12050681

Buljan, Nebojša, et al. "Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes." Buildings, vol. 12, br. 5, 2022. https://doi.org/10.3390/buildings12050681

Buljan, Nebojša, Davor Skejić, Paulina Krolo i Mladen Lukić. "Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes." Buildings 12, br. 5 (2022). https://doi.org/10.3390/buildings12050681

Buljan, N., et al. (2022) 'Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes', Buildings, 12(5). doi: 10.3390/buildings12050681

Buljan N, Skejić D, Krolo P, Lukić M. Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes. Buildings [Internet]. 19.05.2022. [pristupljeno 28.11.2024.];12(5). doi: 10.3390/buildings12050681

N. Buljan, D. Skejić, P. Krolo i M. Lukić, "Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes", Buildings, vol. 12, br. 5, Svibanj 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:157:051588. [Citirano: 28.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:157:051588
Podaci o radu
Naslov (engleski)Fatigue Behaviour of Aluminium Members with Different Notch Root Shapes
AutorNebojša Buljan
AutorDavor Skejić
MBZ: 246764
AutorPaulina Krolo
MBZ: 309360
AutorMladen Lukić
Autorova ustanovaSveučilište u Rijeci
Građevinski fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Građevinarstvo
Sažetak (engleski)
In unitised curtain walls, the transfer of horizontal loads, mainly wind loads, from the upper into the lower unit is achieved through the head/notch interlocking connection. Optimisation of the machining process would require a sharp root of the notch, causing an increase in the stress concentration. In order to predict fatigue resistance during design life, the influence of the radius at the root of the notch has been tested in both static and cyclic regimes. The cyclic regime is based on the load history equivalent of 50 years of wind exposure. Numerical simulations on the test assembly have been conducted in order to verify their adequacy for future research on similar issues. The experimental results demonstrated that, for the given specimen shape and alloy, a sharp notch would not lead to premature failure, and such a detail is safe from the purview of damage-tolerant design.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaBuildings
Brojčani podacivol. 12, br. 5, 681
e-ISSN2075-5309
DOIhttps://doi.org/10.3390/buildings12050681
URN:NBNurn:nbn:hr:157:051588
Datum objave publikacije2022-05-19
ProjektŠifra: RC.2.2.06-0001
Naziv (hrvatski): Razvoj istraživačke infrastrukture na kampusu Sveučilišta u Rijeci
Voditelj: Nevenka Ožanić
Pravna nadležnost: Hrvatska
Financijer: EFRR, MZO
URL dokumentahttps://www.mdpi.com/2075-5309/12/5/681
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2023-11-03 09:56:30