By proper selection of elements of quality control, can affect the process of printing, predict its performance and identify the cause of errors. Screen printing has options for improving fingerprint or facilitating the process in the correct use of the element of control. paser is one of such elements (printing in two colors where the colors go to each other) . The investigation used paser, dosage spacing between screens and surfaces, ways and means to control the required temperature during printing, drying prints correctly with respect to the materials used and the preservation and care of the equipment that is running that process. The aim was to examine all the existing elements and so locate the space for possible improvements. The method of analysis is based on the speed and quality of the process and the percentage of unusable prints. It will be presented the advantages and disadvantages of the new system compared to the existing one. The survey was conducted through six printing processes, of which 3 are made by conventional paser, and 3 new process paser. All six prints contained only text and “outline” and were in two colors. The results showed a significant reduction in the time required for preparation of prints (with straining), removed the possibility of errors when printing wet on wet) and accelerated the process of printing due to the shorter drying time (2 seconds per color, depending on the printing surface).