prikaz prve stranice dokumenta Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material
Rad nije dostupan
Znanstveni rad - Izvorni znanstveni rad
Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material
Ultrasonics, 99 (2019); 1-6. https://doi.org/10.1016/j.ultras.2019.06.005
Žauhar, Gordana; Smilović Radojčić, Đeni; Kaliman, Zoran; Schnurrer-Luke-Vrbanić, Tea; Jurković, Slaven

Institucijski repozitorij: Repozitorij Medicinskog fakulteta u Rijeci

Citirajte ovaj rad

Žauhar, G., Smilović Radojčić, Đ., Kaliman, Z., Schnurrer Luke Vrbanić, T. i Jurković, S. (2019). Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material. Ultrasonics, 99., 1-6. doi: 10.1016/j.ultras.2019.06.005

Žauhar, Gordana, et al. "Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material." Ultrasonics, vol. 99, 2019, str. 1-6. https://doi.org/10.1016/j.ultras.2019.06.005

Žauhar, Gordana, Đeni Smilović Radojčić, Zoran Kaliman, Tea Schnurrer Luke Vrbanić i Slaven Jurković. "Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material." Ultrasonics 99 (2019): 1-6. https://doi.org/10.1016/j.ultras.2019.06.005

Žauhar, G., et al. (2019) 'Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material', Ultrasonics, 99, str. 1-6. doi: 10.1016/j.ultras.2019.06.005

Žauhar G, Smilović Radojčić Đ, Kaliman Z, Schnurrer Luke Vrbanić T, Jurković S. Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material. Ultrasonics [Internet]. 2019. [pristupljeno 24.12.2024.];99:1-6. doi: 10.1016/j.ultras.2019.06.005

G. Žauhar, Đ. Smilović Radojčić, Z. Kaliman, T. Schnurrer Luke Vrbanić i S. Jurković, "Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material", Ultrasonics, vol. 99, str. 1-6, 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:184:345731. [Citirano: 24.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:184:345731
Podaci o radu
Naslov (engleski)Determination of Physiotherapy Ultrasound Beam Quality Parameters From Images Derived Using Thermochromic Material
AutorGordana Žauhar
AutorĐeni Smilović Radojčić
AutorZoran Kaliman
AutorTea Schnurrer-Luke-Vrbanić
AutorSlaven Jurković
Autorova ustanovaSveučilište u Rijeci
Medicinski fakultet
(Katedra za ortopediju i fizikalnu medicinu)
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Fizika
Znanstveno / umjetničko
područje, polje i grana		INTERDISCIPLINARNA PODRUČJA ZNANOSTI
Biotehnologija u biomedicini (prirodno područje, biomedicina i zdravstvo, biotehničko područje)
Sažetak (engleski)
The evaluation of the performance of nine physiotherapy ultrasound transducers used clinically was performed in the hospital environment using an acoustically absorbing thermocromic tile developed at the National Physical Laboratory (UK). The method consists of exposing an acoustic absorber tile, part of which contains a thermochromic pigment, to the ultrasonic beam, thereby forming an image of the intensity profile of the transducer. Images acquired using thermochromic materials were postprocessed in order to estimate effective radiating area (ERA) and beam nonuniformity ratio (BNR) for ultrasound transducers operating within the frequency range from 1.0 to 3.3 MHz, and nominal applied intensities in the range of 1-2 W/cm2. Results of our measurements have shown that thermocromic tile can be used for quality control of ultrasound transducers in the hospital environment. Experimental results show that proposed method can be used to distinguish highly non - uniform ultrasound beams with high value of BNR. Influence of exposure duration on obtained ERA and BNR values was also analysed. Our results show that values for ERA increase with insonation time, while BNR values decrease. In order to compare our results with theory we have estimated temperature rise in thermochromic material experimentally and compare it with theoretical prediction.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaUltrasonics
Brojčani podacivol. 99, str. 1-6
p-ISSN0041-624X
e-ISSN1874-9968
DOIhttps://doi.org/10.1016/j.ultras.2019.06.005
URN:NBNurn:nbn:hr:184:345731
Datum objave publikacije2019
ProjektŠifra: UniRi-prirod-18-75
Naziv (hrvatski): Kontrola kvalitete ultrazvučnih snopova korištenjem termokromatskih materijala
Kratica: UniRi-prirod-18-75
Voditelj: prof. dr. sc. Gordana Žauhar
Pravna nadležnost: Hrvatska
Financijer: Sveučilište u Rijeci
URL dokumentahttp://bib.irb.hr/1014313
Vrsta resursaTekst
Prava pristupaZatvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2022-02-16 09:39:17