prikaz prve stranice dokumenta Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report
  Preuzmi
PDF 1.58 MB
Znanstveni rad - Prikaz slučaja
Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report
Croatian Medical Journal, 59 (2018), 5; 253-257. https://doi.org/10.3325/cmj.2018.59.253
Delimar, Domagoj; Bohaček, Ivan; Dimnjaković, Damjan; Viderščak, Dalibor; Schauperl, Zdravko

Institucijski repozitorij: Dr Med - digitalni repozitorij Medicinskog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Delimar, D., Bohaček, I., Dimnjaković, D., Viderščak, D. i Schauperl, Z. (2018). Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report. Croatian Medical Journal, 59. (5), 253-257. doi: 10.3325/cmj.2018.59.253

Delimar, Domagoj, et al. "Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report." Croatian Medical Journal, vol. 59, br. 5, 2018, str. 253-257. https://doi.org/10.3325/cmj.2018.59.253

Delimar, Domagoj, Ivan Bohaček, Damjan Dimnjaković, Dalibor Viderščak i Zdravko Schauperl. "Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report." Croatian Medical Journal 59, br. 5 (2018): 253-257. https://doi.org/10.3325/cmj.2018.59.253

Delimar, D., et al. (2018) 'Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report', Croatian Medical Journal, 59(5), str. 253-257. doi: 10.3325/cmj.2018.59.253

Delimar D, Bohaček I, Dimnjaković D, Viderščak D, Schauperl Z. Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report. Croatian Medical Journal [Internet]. 31.10.2018. [pristupljeno 28.05.2024.];59(5):253-257. doi: 10.3325/cmj.2018.59.253

D. Delimar, I. Bohaček, D. Dimnjaković, D. Viderščak i Z. Schauperl, "Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report", Croatian Medical Journal, vol. 59, br. 5, str. 253-257, Listopad 2018. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:105:108067. [Citirano: 28.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:105:108067
Podaci o radu
Naslov (engleski)Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report
AutorDomagoj Delimar
AutorIvan Bohaček
AutorDamjan Dimnjaković
AutorDalibor Viderščak
AutorZdravko Schauperl
Autorova ustanovaSveučilište u Zagrebu
Medicinski fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Kliničke medicinske znanosti
Sažetak (engleski)
Excessive metal femoral head wear has been described only as revision surgery complication after primary ceramic-on-ceramic total hip arthroplasty (THA). Here, we present the first case of metal femoral head wear after primary metal-on-polyethylene THA. A 56-year-old woman was referred to our outpatient clinic 17 years after primary right-sided THA, experiencing pain and decreased right hip range of motion. Radiographic examination revealed acetabular cup dislocation, eccentric femoral head wear, damaged titanium porous coating of femoral stem, metallosis, and pseudotumor formation. Endoprosthetic components were extracted, but further reconstruction was impossible due to presence of large acetabular bone defect. Macro- and micro-structure of extracted components were analyzed. Acetabular liner surface was damaged, with scratches, indentations, and embedded metal debris particles present on the entire inner surface. Analysis of metal debris by energy-dispersive spectroscopy showed that it consisted of titanium and stainless-steel particles. Femoral head was gravely worn and elliptically shaped, with abrasive wear visible under scanning electron microscope. No signs of trunnionosis at head/neck junction were observed. Microstructure of femoral head material was homogeneous austenitic, with microhardness of 145 HV 0.2, which is lower than previously described titanium hardness. In conclusion, detached titanium porous coating of femoral stem can cause stainless-steel femoral head wear in primary metal-on-polyethylene THA. As soon as such detachment becomes evident, revision surgery should be considered to prevent devastating complications.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Prikaz slučaja
Status objaveObjavljen
Vrsta recenzijeRecenziran
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaCroatian Medical Journal
Brojčani podacivol. 59, br. 5, str. 253-257
p-ISSN0353-9504
DOIhttps://doi.org/10.3325/cmj.2018.59.253
URN:NBNurn:nbn:hr:105:108067
Datum objave publikacije2018-10-31
URL dokumentahttps://doi.org/10.3325/cmj.2018.59.253
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-03-28 09:51:43