prikaz prve stranice dokumenta Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note
  Preuzmi
PDF 882.94 KB
Znanstveni rad - Izvorni znanstveni rad
Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note
British Journal of Neurosurgery, 33 (2019), 4; 376-378. https://doi.org/10.1080/02688697.2019.1566514
Đurić, Krešimir Saša; Barić, Hrvoje; Domazet, Ivan; Barl, Petra; Njirić, Niko; Mrak, Goran

Institucijski repozitorij: Dr Med - digitalni repozitorij Medicinskog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Đurić, K. S., Barić, H., Domazet, I., Barl, P., Njirić, N. i Mrak, G. (2019). Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note. British Journal of Neurosurgery, 33. (4), 376-378. doi: 10.1080/02688697.2019.1566514

Đurić, Krešimir Saša, et al. "Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note." British Journal of Neurosurgery, vol. 33, br. 4, 2019, str. 376-378. https://doi.org/10.1080/02688697.2019.1566514

Đurić, Krešimir Saša, Hrvoje Barić, Ivan Domazet, Petra Barl, Niko Njirić i Goran Mrak. "Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note." British Journal of Neurosurgery 33, br. 4 (2019): 376-378. https://doi.org/10.1080/02688697.2019.1566514

Đurić, K. S., et al. (2019) 'Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note', British Journal of Neurosurgery, 33(4), str. 376-378. doi: 10.1080/02688697.2019.1566514

Đurić KS, Barić H, Domazet I, Barl P, Njirić N, Mrak G. Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note. British Journal of Neurosurgery [Internet]. 2019. [pristupljeno 28.12.2024.];33(4):376-378. doi: 10.1080/02688697.2019.1566514

K. S. Đurić, H. Barić, I. Domazet, P. Barl, N. Njirić i G. Mrak, "Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note", British Journal of Neurosurgery, vol. 33, br. 4, str. 376-378, 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:105:410806. [Citirano: 28.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:105:410806
Podaci o radu
Naslov (engleski)Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects – a single Centre experience: technical note
AutorKrešimir Saša Đurić
AutorHrvoje Barić
AutorIvan Domazet
AutorPetra Barl
AutorNiko Njirić
AutorGoran Mrak
Autorova ustanovaSveučilište u Zagrebu
Medicinski fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Kliničke medicinske znanosti
Sažetak (engleski)
We report our experience with 3D customised cranioplasties for large cranial defects. They were made by casting bone cement in custom made moulds at the time of surgery. Between October 2015 and January 2018, 29 patients underwent the procedure; 25 underwent elective cranioplasties for large cranial defects and four were bone tumour resection and reconstruction cases. The majority of patients (96.5%) reported a satisfactory aesthetic outcome. No infections related to the surgical procedure were observed in the follow-up period. The method proved to be effective and affordable.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran
Verzija publikacijeZavršna verzija rukopisa prihvaćena za objavljivanje (postprint)
Naslov časopisaBritish Journal of Neurosurgery
Brojčani podacivol. 33, br. 4, str. 376-378
p-ISSN0268-8697
DOIhttps://doi.org/10.1080/02688697.2019.1566514
URN:NBNurn:nbn:hr:105:410806
Datum objave publikacije2019
URL dokumentahttps://doi.org/10.1080/02688697.2019.1566514
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-03-28 10:39:32