This paper describes the process of modeling and construction of a 3D printed webcam stand. At the beginning, the reasons and motives for the growing need for a webcam stand are given, and an overview of the currently available webcam stands on the market is given. In the following chapters, the overview is extended to other types of stands such as stands for mobile phones, tablets, cameras, etc., in order to find the optimal solution. For each part of the webcam stand (table stand, base stand, camera stand), different designs are listed, and for the final stand design, those designs are selected that are considered optimal and most suitable for production with 3D printing technology. After the individual components of the stand were selected and their individual functionality was elaborated in detail, in order to meet the initially set conditions, a detailed construction elaboration of individual parts and preparation of models for 3D printing began. Then the process of assembling the parts into an assembly is described, and an overview of all the necessary parts and tools is given. Finally, the functionality of the webcam stand was tested and it was determined that the webcam stand meets all the set requirements such as adjusting the height and angle of filming, reception for different models of cameras and mounting the webcam stand on a workbench.