prikaz prve stranice dokumenta Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization
  Preuzmi
PDF 2.89 MB
Znanstveni rad - Izvorni znanstveni rad
Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization
Materials, 14 (2021), 10; 2611. https://doi.org/10.3390/ma14102611
Marović, Danijela; Haugen, Håvard J.; Negovetić Mandić, Visnja; Par, Matej; Zheng, Kai; Tarle, Zrinka; Boccaccini, Aldo R.

Institucijski repozitorij: Repozitorij stomatološkog fakulteta u Zagrebu

Citirajte ovaj rad

Marović, D., Haugen, H. J., Negovetić Mandić, V., Par, M., Zheng, K., Tarle, Z. i Boccaccini, A. R. (2021). Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization. Materials, 14. (10). doi: 10.3390/ma14102611

Marović, Danijela, et al. "Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization." Materials, vol. 14, br. 10, 2021. https://doi.org/10.3390/ma14102611

Marović, Danijela, Håvard J. Haugen, Visnja Negovetić Mandić, Matej Par, Kai Zheng, Zrinka Tarle i Aldo R. Boccaccini. "Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization." Materials 14, br. 10 (2021). https://doi.org/10.3390/ma14102611

Marović, D., et al. (2021) 'Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization', Materials, 14(10). doi: 10.3390/ma14102611

Marović D, Haugen HJ, Negovetić Mandić V, Par M, Zheng K, Tarle Z, i sur.. Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization. Materials [Internet]. 17.05.2021. [pristupljeno 25.12.2024.];14(10). doi: 10.3390/ma14102611

D. Marović, et al., "Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization", Materials, vol. 14, br. 10, Svibanj 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:309264. [Citirano: 25.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:309264
Podaci o radu
Naslov (engleski)Incorporation of Copper-Doped Mesoporous Bioactive Glass Nanospheres in Experimental Dental Composites: Chemical and Mechanical Characterization
AutorDanijela Marović
AutorHåvard J. Haugen
AutorVisnja Negovetić Mandić
AutorMatej Par
AutorKai Zheng
AutorZrinka Tarle
AutorAldo R. Boccaccini
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
Experimental dental resin composites incorporating copper-doped mesoporous bioactive glass nanospheres (Cu-MBGN) were designed to impart antibacterial and remineralizing properties. The study evaluated the influence of Cu-MBGN on the mechanical properties and photopolymerization of resin composites. Cu-MBGN were synthesized using a microemulsion-assisted sol–gel method. Increasing amounts of Cu-MBGN (0, 1, 5, and 10 wt %) were added to the organic polymer matrix with inert glass micro- and nanofillers while maintaining a constant resin/filler ratio. Six tests were performed: X-ray diffraction, scanning electron microscopy, flexural strength (FS), flexural modulus (FM), Vickers microhardness (MH), and degree of conversion (DC). FS and MH of Cu-MBGN composites with silica fillers showed no deterioration with aging, with statistically similar results at 1 and 28 days. FM was not influenced by the addition of Cu-MBGN but was reduced for all tested materials after 28 days. The specimens with 1 and 5% Cu-MBGN had the highest FS, FM, MH, and DC values at 28 days, while controls with 45S5 bioactive glass had the lowest FM, FS, and MH. DC was high for all materials (83.7–93.0%). Cu-MBGN composites with silica have a potential for clinical implementation due to high DC and good mechanical properties with adequate resistance to aging.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 14, br. 10, 2611
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma14102611
URN:NBNurn:nbn:hr:127:309264
Datum objave publikacije2021-05-17
URL dokumentahttps://www.mdpi.com/1996-1944/14/10/2611
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-10 10:48:43