prikaz prve stranice dokumenta Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material
  Preuzmi
PDF 553.57 KB
Znanstveni rad - Izvorni znanstveni rad
Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material
Materials, 14 (2021), 4; 755. https://doi.org/10.3390/ma14040755
Brkanović, Sandra; Ivanišević, Ana; Miletić, Ivana; Mezdić, Dražen; Jukić Krmek, Silvana

Institucijski repozitorij: Repozitorij stomatološkog fakulteta u Zagrebu

Citirajte ovaj rad

Brkanović, S., Ivanišević, A., Miletić, I., Mezdić, D. i Jukić Krmek, S. (2021). Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material. Materials, 14. (4). doi: 10.3390/ma14040755

Brkanović, Sandra, et al. "Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material." Materials, vol. 14, br. 4, 2021. https://doi.org/10.3390/ma14040755

Brkanović, Sandra, Ana Ivanišević, Ivana Miletić, Dražen Mezdić i Silvana Jukić Krmek. "Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material." Materials 14, br. 4 (2021). https://doi.org/10.3390/ma14040755

Brkanović, S., et al. (2021) 'Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material', Materials, 14(4). doi: 10.3390/ma14040755

Brkanović S, Ivanišević A, Miletić I, Mezdić D, Jukić Krmek S. Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material. Materials [Internet]. 05.02.2021. [pristupljeno 27.12.2024.];14(4). doi: 10.3390/ma14040755

S. Brkanović, A. Ivanišević, I. Miletić, D. Mezdić i S. Jukić Krmek, "Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material", Materials, vol. 14, br. 4, Veljača 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:622072. [Citirano: 27.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:622072
Podaci o radu
Naslov (engleski)Effect of Nano-Filled Protective Coating and Different pH Enviroment on Wear Resistance of New Glass Hybrid Restorative Material
AutorSandra Brkanović
AutorAna Ivanišević
AutorIvana Miletić
AutorDražen Mezdić
AutorSilvana Jukić Krmek
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
The purpose of the study was to determine the wear rate of Equia Forte HT Fil with Equia Forte Coat or without coating and compare it with Fuji IX GP high-viscosity glass ionomer cement (GIC) in conditions with acid load or at neutral pH. The samples were stored for 7 days: (1) in artificial saliva, (2) in artificial saliva and cyclically exposed to low pH, and (3) in distilled water and cyclically exposed to low pH. Wear was determined by measuring the difference in mass before and after brushing in an abrasion testing device. The wear of Fuji IX GP was significantly higher than that of Equia Forte HT Fil with or without coating (p = 0.000). The difference between Equia Forte HT Fil with and without Coat was not statistically significant (p < 0.803). The differences in wear resistance between samples stored in saliva and in distilled water were not significant (p = 0.588). Periodic exposure to the low pH solution significantly affected the wear resistance of all materials (p = 0.000). Equia Forte HT Fil was more resistant to wear than Fuji IX GP in all storage conditions. A resinous coat did not significantly increase wear resistance.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 14, br. 4, 755
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma14040755
URN:NBNurn:nbn:hr:127:622072
Datum objave publikacije2021-02-05
URL dokumentahttps://www.mdpi.com/1996-1944/14/4/755
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-10 12:09:16