prikaz prve stranice dokumenta The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution
  Preuzmi
PDF 2.07 MB
Znanstveni rad - Izvorni znanstveni rad
The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution
U: Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018. / Jozić, Sonja; Gjeldum, Nikola (ur.). Split: Croatian Society for Mechanical Technologies, 2018. str. 193-198. urn:nbn:hr:115:841958
Vrsalović, Ladislav; Jerčić, Radosna; Gudić, Senka; Ivanić, Ivana; Kožuh, Stjepan; Kosec, Borut; Bizjak, Milan; Gojić, Mirko

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Vrsalović, L., Jerčić, R., Gudić, S., Ivanić, I., Kožuh, S., Kosec, B. ... Gojić, M. (2018). The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution. U S. Jozić, (Ur.), N. Gjeldum, (Ur.), Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018 (str. 193-198). Split: Croatian Society for Mechanical Technologies. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:841958

Vrsalović, Ladislav, et al. "The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution." Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018, Ur. Sonja Jozić, Ur. Nikola Gjeldum, Croatian Society for Mechanical Technologies, 2018, str. 193-198. https://urn.nsk.hr/urn:nbn:hr:115:841958

Vrsalović, Ladislav, Radosna Jerčić, Senka Gudić, Ivana Ivanić, Stjepan Kožuh, Borut Kosec, Milan Bizjak i Mirko Gojić. "The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution." U Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018, 193-198. Split: Croatian Society for Mechanical Technologies, 2018. Citirano 27.12.2024.. https://urn.nsk.hr/urn:nbn:hr:115:841958

Vrsalović, L., et al. (2018) 'The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution', u Jozić, S. (ur.), Gjeldum, N. (ur.), Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018, Croatian Society for Mechanical Technologies, Split, str. 193-198. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:841958 (Datum pristupa: 27.12.2024.)

Vrsalović L, Jerčić R, Gudić S, Ivanić I, Kožuh S, Kosec B, i sur.. The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution. U: S. Jozić, ur., N. Gjeldum, ur. Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018. Split: Croatian Society for Mechanical Technologies; 2018. Str. 193-198. [pristupljeno 27.12.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:841958

L. Vrsalović, et al., "The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution", Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018, S. Jozić i N. Gjeldum, Ur. Split: Croatian Society for Mechanical Technologies, 2018. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:841958 [Citirano: 27.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:841958
Podaci o radu
Naslov (engleski)The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution
AutorLadislav Vrsalović
AutorRadosna Jerčić
AutorSenka Gudić
AutorIvana Ivanić
AutorStjepan Kožuh
AutorBorut Kosec
AutorMilan Bizjak
AutorMirko Gojić
UrednikSonja Jozić
UrednikNikola Gjeldum
Autorova ustanovaSveučilište u Splitu
Kemijsko-tehnološki fakultet
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Kemijsko inženjerstvo
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
The influence of pH and temperature of 0.9% NaCl solution on corrosion behavior of CuAlMnTi alloy ribbons, produced by rapid solidification using melt spinning method, were investigated by electrochemical methods. Open circuit potential measurement, linear and potentiodynamic polarization were employed during the investigation, and the measurements were conducted in the electrolyte temperature of 10, 24, 37 and 50 oC and in solution pH of 7.4, 5.4 and 3.4. In has been found that corrosion rate generally increase with increasing the temperature of the electrolyte while the influence of pH change on CuAlNiTi ribbon corrosion is little less pronounced. After polarization measurements CuAlNiTi ribbon surfaces were investigated with light microscope and with SEM/EDS analysis.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaProceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018
Brojčani podacistr. 193-198
p-ISSN1847-7917
URN:NBNurn:nbn:hr:115:841958
Datum objave publikacije2018
ProjektŠifra: IP-2014-09-3405
Naziv (hrvatski): Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra
Kratica: DMFP-CuSMA
Voditelj: Mirko Gojić
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
SkupNaziv: 8th International Conference Mechanical Technologies and Structural Materials 2018
Lokacija: Split, Hrvatska
Datum početka: 2018-09-27
Datum završetka: 2018-09-28
Vrsta izlaganja: Predavanje
URL dokumentahttp://bib.irb.hr/957799
Vrsta resursaTekst
IzdavačCroatian Society for Mechanical Technologies
Mjesto izdavanjaSplit
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2019-07-03 07:32:05