prikaz prve stranice dokumenta The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel
  Preuzmi
PDF 4.3 MB
Znanstveni rad - Izvorni znanstveni rad
The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel
Metals, 10 (2020), 2; 1-11. https://doi.org/10.3390/met10020294
Rešković, Stoja; Slokar Benić, Ljerka; Lovrenić-Jugović, Martina

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Rešković, S., Slokar Benić, Lj. i Lovrenić Jugović, M. (2020). The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel. Metals, 10. (2), 1-11. doi: 10.3390/met10020294

Rešković, Stoja, et al. "The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel." Metals, vol. 10, br. 2, 2020, str. 1-11. https://doi.org/10.3390/met10020294

Rešković, Stoja, Ljerka Slokar Benić i Martina Lovrenić Jugović. "The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel." Metals 10, br. 2 (2020): 1-11. https://doi.org/10.3390/met10020294

Rešković, S., Slokar Benić, Lj. i Lovrenić Jugović, M. (2020) 'The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel', Metals, 10(2), str. 1-11. doi: 10.3390/met10020294

Rešković S, Slokar Benić Lj, Lovrenić Jugović M. The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel. Metals [Internet]. 24.02.2020. [pristupljeno 28.11.2024.];10(2):1-11. doi: 10.3390/met10020294

S. Rešković, Lj. Slokar Benić i M. Lovrenić Jugović, "The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel", Metals, vol. 10, br. 2, str. 1-11, Veljača 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:053240. [Citirano: 28.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:053240
Podaci o radu
Naslov (engleski)The Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel
AutorStoja Rešković
AutorLjerka Slokar Benić
AutorMartina Lovrenić-Jugović
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
In this paper, thermomechanical processing of niobium microalloyed steel was performed with the purpose of determining the interaction between niobium precipitates and dislocations, as well as determining the influence of the temperature of final deformation on the degree of precipitation and dislocation density. Two variants of thermomechanical processing with dierent final rolling temperatures were carried out. Samples were studied using electrochemical isolation with an atomic absorption spectrometer, transmission electron microscopy, X-ray diraction analysis, and universal tensile testing with a thermographic camera. The results show that the increase in the density of dislocations before the onset of intense precipitation is insignificant because the recrystallization process takes place simultaneously. It increases with the onset of strain-induced precipitation. In this paper, it is shown that niobium precipitates determine the density of dislocations. The appearance of Lüders bands was noticed as a consequence of the interaction between niobium precipitates and dislocations during the subsequent cold deformation. In both variants of the industrial process performed on the cold deformed strip, Lüders bands appeared
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMetals
Brojčani podacivol. 10, br. 2, str. 1-11, 294
e-ISSN2075-4701
DOIhttps://doi.org/10.3390/met10020294
URN:NBNurn:nbn:hr:115:053240
Datum objave publikacije2020-02-24
ProjektŠifra: IP-2016-06-1270
Naziv (hrvatski): Istraživanja početka plastičnog toka metala kod hladne deformacije
Kratica: MFSRIP062016
Voditelj: Stoja Rešković
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
URL dokumentahttps://www.mdpi.com/2075-4701/10/2/294
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2020-02-25 09:51:06